Airtac MIC Cushioned Mini Cylinder MIC32X600SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X600SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X600SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X600SU is a double-acting, round-body stainless-steel mini cylinder built for demanding actuation. This non-standard 600 mm stroke variant exceeds the typical 500 mm maximum, making it a made-to-order solution for extended travel. The stainless barrel and piston rod provide mild corrosion resistance, making it well-suited for washdown or humid industrial environments.
A defining feature of this series is the adjustable air cushion at both ends, which allows you to tune a needle valve to absorb end-of-stroke shock at high cycling speeds. This protects the load and reduces noise far better than a fixed bumper. With a 1/8" port and a safe working load of roughly 241 N, it lifts about 20.5 kg vertically with a 2:1 safety margin. The U back cover provides a 90-degree mounting orientation, and the -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC32X600SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X600SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X600SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X600SU Is Used
Extended-Reach Diversion
Uses the non-standard 600 mm stroke to push heavy cartons across wide conveyor belts at high speed, relying on the adjustable air cushion to prevent harsh end impacts.
Vertical Material Lowering
Leverages the 402.2 N push force to lower approximately 20.5 kg loads smoothly, tuning the cushion to decelerate the descent before reaching the bottom.
Washdown Sorting Gate
Actuates routing gates in humid or lightly corrosive packing zones, where the stainless steel round-body construction maintains operational integrity.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X600SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to an MIC25 yields 245.3 N of push force at 0.5 MPa, while stepping up to an MIC40 provides 628.3 N. The adjustable air cushion is essential here if you are moving heavier loads at high velocities, as it decelerates the piston smoothly at the stroke ends. Note that the 600 mm stroke is non-standard and made-to-order beyond the 500 mm catalog maximum.
Because this is a double-acting cylinder, it does not hold position on air loss; the piston will drift if pressure drops, as the cushion only decelerates near the end of travel and acts as no brake. For suspended loads, pair this with an external rod lock or a pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion, while the internal magnet (-S) supports CMSG, DMSG, and EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X600SU FAQ
This double-acting 32 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa. The 600 mm stroke is a non-standard, made-to-order length exceeding the 500 mm standard maximum.
The adjustable air cushion at both ends only decelerates the piston near the stroke end to reduce shock; it is not a brake and cannot hold a load on air loss, so you need an external rod lock or pilot check valve for holding. The -S suffix means it has a built-in magnet for CMSG, DMSG, and EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X600SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.