Airtac MIC Cushioned Mini Cylinder MIC32X65CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X65CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 65mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke65 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X65CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier motion tasks. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. A needle-set variable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload and cutting noise. This unit lacks a magnet and cannot accept position sensors.
Equipped with a CM round rear cover, the MIC32X65CM features a 1/4 inch air port and an M10x1.25 male rod thread. It yields a safe working load of about 241 N, lifting roughly 20.5 kg vertically with a 2:1 margin. Operating at speeds of 30-800 mm/s, it decelerates smoothly without locking the load.
Airtac MIC Cushioned Mini Cylinder MIC32X65CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X65CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X65CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X65CM Is Used
Carton Diverting
Pushes heavy cartons at high speed across transfer belts, relying on the adjustable cushion to stop the 402 N stroke without slamming.
Flap Folding
Drives packaging flaps rapidly on automated lines where the needle-set cushion prevents tearing during the 65 mm travel.
Pallet Stopper
Acts as a high-cycle pallet arrestor, using the stainless build to endure dusty logistics environments while softening end impacts.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X65CM the Right Cylinder?
For lower force needs, the MIC25 bore provides 245.3 N push at 0.5 MPa, while stepping up to the MIC40 yields 628.3 N. Choose this 32 mm bore when moving substantial mass at high velocity, as the adjustable cushion is essential for preventing impact damage. Note that a plain cylinder drifts on air loss; the cushion only decelerates near stroke end and never acts as a brake. Use an external rod lock or pilot check valve to hold a load.
This SKU has no -S magnet, meaning CMSG, DMSG, and EMSG switches cannot be fitted. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X65CM FAQ
It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa. This model uses a 1/4 inch air port.
No, this specific SKU lacks the internal magnet, so CMSG, DMSG, or EMSG switches cannot be installed. You would need the -S variant for sensing. The adjustable air cushion only serves to decelerate the load, not hold it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X65CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.