Airtac MIC Cushioned Mini Cylinder MIC32X700SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X700SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 700mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke700 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X700SU
Delivering 563 N of push force at 0.7 MPa, the AirTAC MIC32X700SU is a robust double-acting round-body mini cylinder built for demanding motion tasks. It features a stainless-steel barrel and piston rod that resist mild corrosion and washdown environments. This unit includes a U-type 90-degree rear cover for versatile port and mounting orientation. Because the 700 mm stroke exceeds the 500 mm standard maximum for this bore, it is manufactured as a non-standard, made-to-order unit.
The defining feature of the MIC series is the adjustable air cushion at both ends, which uses a needle valve to soak up end-of-stroke shock at high speeds, protecting the load and cutting noise. It operates at speeds of 30-800 mm/s and uses a 1/4" port with a Ø12 mm rod. Equipped with the -S magnet, it supports CMSG, DMSG, and EMSG position switches. Based on the 402.2 N push force at 0.5 MPa, this cylinder handles a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X700SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X700SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X700SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X700SU Is Used
Long-Stroke Diverting
Pushes heavy packages across a wide conveyor belt using its 700 mm reach, while the adjustable cushion absorbs the impact of rapid direction changes.
Overhead Lowering
Lowers a 20 kg material hopper smoothly; the dual air cushions prevent harsh slamming at the bottom of the 700 mm descent.
Large Carton Forming
Folds large corrugated cartons at high speed, relying on the 563 N push force at 0.7 MPa to square up heavy packaging materials.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X700SU the Right Cylinder?
When sizing this actuator, consider that the smaller Ø25 bore provides 245.3 N of push force at 0.5 MPa, while the larger Ø40 bore steps up to 628.3 N. Choose the Ø32 bore when you need moderate force and a long reach. The adjustable air cushion is essential here; at a 700 mm stroke, the piston can reach high terminal velocities, and the needle-set cushion decelerates the load smoothly. Note that the cushion only decelerates near the stroke end and does not lock or hold the load.
If your application requires the piston to stay put after a loss of air pressure or when a valve is centered, you must add an external rod lock or a pilot-operated check valve, as the piston will drift otherwise. For mounting, you can utilize the U-type back cover alongside LB foot, FA flange, SDB pivot, or TC trunnion brackets. The built-in magnet (-S) allows for direct mounting of CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X700SU FAQ
This double-acting cylinder uses a 1/4" air port and a Ø12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and acts purely as a shock absorber, never as a brake. For vertical load holding during air loss, install an external rod lock or pilot check valve. The stainless steel build and -S magnet for CMSG/DMSG/EMSG sensors make it ideal for dynamic tracking.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X700SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.