Airtac MIC Cushioned Mini Cylinder MIC32X75CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X75CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X75CM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X75CM is a robust round-body mini cylinder built for demanding actuation. This double-acting unit features a stainless-steel barrel and piston rod that shrug off mild corrosion and washdown environments. A defining trait of this series is the adjustable air cushion at both ends: you turn a needle valve to decelerate the load smoothly at high speed, protecting the machinery and cutting impact noise. Equipped with a CM round rear cover, it runs a 75 mm stroke on a 1/8" port.
This specific SKU lacks the internal magnet, meaning it cannot host CMSG, DMSG, or EMSG position switches; choose an -S variant if you require sensing. The 32 mm bore pairs a 12 mm rod with an M10x1.25 male thread, yielding a practical safe working load of roughly 241 N, or about 20.5 kg of vertical lift with a 2:1 safety margin. Remember that the end cushions only slow the piston near stroke end and do not function as a brake.
Airtac MIC Cushioned Mini Cylinder MIC32X75CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X75CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X75CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X75CM Is Used
High-Speed Carton Diversion
Uses the 402.2 N push force to deflect heavy packages on a sorting line, relying on the adjustable air cushions to stop the 75 mm stroke smoothly without slamming.
Clamp and Seal Actuation
Drives a packaging jaw that requires substantial mid-cycle force, where the stainless construction withstands occasional washdowns and the needle valve tunes the deceleration.
Light Press Assembly
Pushes a bearing into a housing with a safe working load of 241 N, using the 1/8" port for rapid fill and exhaust while the cushions protect the workpiece at stroke end.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X75CM the Right Cylinder?
When sizing this 32 mm bore, dropping down to the MIC25X50 reduces your push force to 245.3 N at 0.5 MPa, while stepping up to the MIC40X75 increases it substantially to 628.3 N. Select this 32 mm model when moving heavier fixtures at high speeds, as the needle-set air cushions become essential for preventing end-of-stroke banging. Because this is a non-magnetic SKU, you cannot mount sensors; factor in an -S version if your control system requires position feedback.
For mounting flexibility beyond the CM round rear cover, the series supports LB foot, FA flange, SDB pivot, and TC trunnion brackets. Note that a standard cylinder drifts when air pressure drops or a valve is centered; the air cushion only decelerates the load near the stroke end and will not hold position. To lock a suspended load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X75CM FAQ
This double-acting round-body mini cylinder uses a 1/8" air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include an internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S magnet version for sensing. The adjustable air cushions at both ends serve only to decelerate the load, not to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X75CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.