Airtac MIC Cushioned Mini Cylinder MIC32X80SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X80SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X80SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X80SU is a double-acting round-body mini cylinder built for demanding actuation. The stainless-steel barrel and Ø12 mm piston rod resist mild corrosion and washdown environments. A 1/8" port supplies air, while the U-style back cover provides a 90-degree mounting orientation for tight machinery layouts.
What sets this 32 mm bore unit apart is its adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to absorb high-speed shock, protecting the load and reducing noise better than a fixed bumper. For sizing, a safe working load is about 241 N, meaning it lifts roughly 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X80SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X80SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X80SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X80SU Is Used
High-Speed Carton Diverting
Uses the 402.2 N thrust to push heavy packages at 800 mm/s, relying on the tuned air cushion to stop the 80 mm stroke smoothly without slamming.
Vertical Fill Station
Lifts roughly 20.5 kg of product with a 2:1 safety margin, while the stainless build handles washdown and the U cover fits 90-degree tight spaces.
Component Pressing
Applies steady clamping force via the 1/8" port, using the adjustable end cushions to protect delicate tooling from shock during rapid retraction.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X80SU the Right Cylinder?
When sizing this 32 mm bore actuator, compare it against adjacent bores. If you need less force, the MIC25 offers 245.3 N push at 0.5 MPa; stepping up to the MIC40 provides 628.3 N. Choose this model when moving heavier loads at high speeds where the adjustable dual-end cushions can be precisely tuned to prevent impact damage.
Remember that the air cushion only decelerates the piston near the stroke end—it does not function as a lock or brake. If your application must hold a load vertically during air loss, add an external rod lock or pilot-operated check valve. This SKU includes the -S magnet for CMSG, DMSG, or EMSG sensors, and supports LB, FA, SDB, and TC mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X80SU FAQ
This double-acting 32 mm bore cylinder uses a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end to reduce shock; it is not a brake. The piston will drift on air loss. For vertical loads, install an external rod lock or pilot check valve. The -S magnet supports CMSG, DMSG, and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X80SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.