Airtac MIC Cushioned Mini Cylinder MIC32X80U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X80U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X80U
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. A needle-set variable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload and reducing noise. This U-style configuration features a 90-degree rear cover for specific mounting orientations.
Equipped with a 12 mm rod, M10x1.25 male thread, and a 1/8" port, it operates at speeds from 30 to 800 mm/s. Without the -S magnet option, this specific SKU cannot accept position sensors. For vertical applications, it safely lifts about 20.5 kg with a 2:1 safety margin. Note that the cushion only decelerates the load near stroke end; it does not function as a brake.
Airtac MIC Cushioned Mini Cylinder MIC32X80U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X80U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X80U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X80U Is Used
High-Speed Diverters
Drives conveyor sorting arms at high cycle rates, using the adjustable cushion to halt the 402.2 N thrust smoothly without slamming the payload.
Case Erector Jaws
Opens and closes packaging jaws rapidly; the stainless build handles washdown while the needle-set cushion protects the cardboard folding mechanics.
Vertical Lift Gates
Lifts light access gates or product trays up to 20.5 kg vertically, relying on the 1/8" port airflow for swift, cushioned actuation.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X80U the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MIC25X50 yields 245.3 N push at 0.5 MPa, while stepping up to the MIC40X80 provides 628.3 N. Choose this 32 mm model when moving moderate masses at high velocities where the adjustable cushion is critical for smooth stops. The U back cover suits 90-degree port or mounting layouts.
Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG switches; add the -S suffix if you need sensing. Remember that a standard cylinder drifts on air loss—the cushion decelerates but does not hold position. Specify an external pilot check valve or rod lock for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X80U FAQ
This 32 mm bore cylinder features a 1/8" port and a 12 mm rod with an M10x1.25 thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for sensing capabilities. The adjustable air cushion will decelerate the load at stroke end but will not lock or hold the position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X80U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.