Airtac MIC Cushioned Mini Cylinder MIC32X85SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X85SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 85mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke85 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X85SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X85SU is a robust round-body mini cylinder built for double-acting operation. A needle-set variable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload while significantly reducing noise compared to fixed bumper designs. Its stainless-steel barrel and piston rod provide reliable resistance to mild corrosion and washdown environments.
This Ø32 mm unit features a 1/8" port and an M10x1.25 male rod thread. Because it carries the -S suffix, it includes a built-in piston magnet for position sensing with CMSG, DMSG, or EMSG switches. For sizing context, its safe working load is roughly 241 N, meaning it can vertically lift about 20.5 kg with a 2:1 safety margin. The U-style back cover provides a 90-degree mounting orientation for tight spatial constraints.
Airtac MIC Cushioned Mini Cylinder MIC32X85SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X85SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X85SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X85SU Is Used
High-Speed Diverting
Cushions the rapid 402.2 N stroke used to push heavy cartons across a transfer belt without slamming the end caps.
Vertical Flap Folding
Lifts and folds heavy packaging flaps with a safe working load of 241 N, relying on the needle valve to prevent jarring stops.
Pallet Component Pusher
Handles the robust 563 N push force at 0.7 MPa needed to index heavy components into pallet slots at high speed.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X85SU the Right Cylinder?
When sizing this 85 mm stroke unit, note that stepping down to the MIC25 bore drops the 0.5 MPa push force to 245.3 N, while stepping up to the MIC40 bore increases it to 628.3 N. The adjustable air cushion is essential here if you are moving heavier masses at high cycle speeds, as it prevents harsh impact at the stroke ends. Keep in mind the cushion only decelerates the piston; it does not act as a brake. To prevent drift on air loss, you must add an external rod lock or pilot-operated check valve.
Mounting flexibility is provided through LB foot, FA flange, SDB pivot, and TC trunnion brackets. The integrated magnet (-S) enables direct sensor mounting, whereas non-S SKUs cannot accept switches. This U back cover configuration rotates the rear port 90 degrees, which helps route tubing cleanly in confined machinery layouts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X85SU FAQ
This double-acting cylinder uses a 1/8" port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and does not lock the rod. To hold a vertical load securely, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X85SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.