Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC is a genuine double acting + cushion round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
About the Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC
Delivering 628.3 N of push force at 0.5 MPa, the MIC40X75SCMTC is a robust double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. A 1/4" port feeds the 16 mm piston rod, while the CM round rear cover and TC trunnion mounting ensure versatile load anchoring. The built-in -S magnet enables direct CMSG, DMSG, or EMSG sensor integration.
Twin adjustable air cushions at both stroke ends let you dial in needle deceleration to absorb high-speed impact, a major upgrade over fixed bumper designs. This 40 mm bore unit yields a safe working load of roughly 377 N, lifting about 32 kg vertically with a 2:1 margin. Note the cushion only eases the stop—it is not a brake.
Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC Is Used
High-Mass Diverting
Shifts heavy cartons on packaging lines using the 628.3 N thrust, relying on adjustable cushions to halt the 75 mm stroke without slamming.
Vertical Lift Gates
Raises access doors weighing up to 32 kg, benefiting from the stainless build and smooth needle-set deceleration at cycle end.
Heavy Chuck Indexing
Pivots bulky tooling via the TC trunnion, using the 1/4" port volume to maintain speed while the air cushion protects the mechanism.
Is the Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC the Right Cylinder?
At the top of the MIC range, there is no larger standard bore, but stepping down to the MIC32 drops the 0.5 MPa push force to 402.2 N. Choose this 40 mm model when moving heavier assemblies at high speeds where the needle-set air cushion can genuinely eliminate end-of-stroke shock. The TC trunnion pairs with the CM back cover for pivoting loads.
Because the air cushion only decelerates and never locks the rod, suspended loads will drift if air pressure drops—add an external rod lock or pilot check valve for safety. Position detection requires the included -S magnet to mount your CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC FAQ
This 40 mm bore cylinder uses a 1/4" port and a 16 mm rod with an M12x1.25 male thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.
The adjustable air cushion only decelerates the piston near the stroke end; it is not a brake, so you need a pilot check valve or rod lock to hold loads. The -S magnet allows CMSG, DMSG, and EMSG switches to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC40X75SCMTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.