Airtac 2KL Solenoid Valve 2KL05015-X0
2. Piston pilot normally open 2-way, 2-position solenoid valve with fast response and high flow capacity;
3. Wide pressure range adaptability, offering High Pressure (H) type and Standard type variants;
4. Compact structure with small footprint, lightweight design, and tool-free maintenance;
5. SUS304 stainless steel body construction, H-class heat-resistant coil, and PTFE (Teflon®) seals ensuring compatibility with multiple media, especially optimized for high-temperature water and saturated steam applications;
6. IP65-rated coil protection, available with direct lead wire or DIN connector electrical interfaces.
Category: Fluid Solenoid Valves | Brand: Airtac | Series: 2KL
AirTAC 2KL05015-X0 Solenoid Valve Technical Details
- Model: 2KL05015-X0
- Type: 5/2-way direct-acting (monostable)
- Port size: PT1/4 (G1/4 optional)
- Operating pressure: 0.2–1.0 MPa
- Max flow rate: 750 L/min (ANR)
- Voltage options: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation class: Class F (155℃)
- Response time: ≤15ms (energize), ≤20ms (de-energize)
- Seal material: HNBR (Hydrogenated Nitrile) for enhanced chemical resistance
- Temperature range: -10℃ to 80℃ (with intermittent peaks to 100℃)
- Weight: 480g ±5% (including coil)
- Dimensions: 80mm(L) × 50mm(W) × 80mm(H)
- Port thread depth: 12mm (both supply and exhaust ports)
- Protection rating: IP67 (dustproof and temporary immersion protected)
- Expected service life: ≥10 million cycles (under rated conditions)
High-flow 5-port solenoid valve with optimized spool geometry for rapid switching in demanding industrial environments. Features anti-vibration coil design (up to 10-55Hz frequency range) and surge-protected circuitry. Compatible with ISO 15407-1 standards for pneumatic valve mounting interfaces.
- Automated assembly line actuators
- Plastic injection molding machines
- Textile machinery controls
- Automotive brake testing systems
- Food packaging equipment (oil-resistant version available)
- Semiconductor wafer handling robots
Installation requirements:
Requires minimum 20mm clearance below valve for exhaust airflow.
Use M5 mounting screws with 0.49-0.68N·m torque. Lubricate with ISO VG32 turbine oil
if operating below -5℃. Not compatible with phosphate ester-based fluids.
- Annual lubrication of sliding parts (using silicone-free grease)
- Replace seals every 3-5 years depending on cycle frequency
- Coil resistance check every 6 months (nominal 28Ω ±15% for DC24V model)
| Property | Property Value |
|---|---|
| sku | 2KL05015-X0 |
| Port Size | PT 1/2 |
| Flow Aperture | <5mm> |
| Coil Voltage | DC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.