Airtac 2KL Solenoid Valve 2KL50050EI
2. Piston pilot normally open 2-way, 2-position solenoid valve with fast response and high flow capacity;
3. Wide pressure range adaptability, offering High Pressure (H) type and Standard type variants;
4. Compact structure with small footprint, lightweight design, and tool-free maintenance;
5. SUS304 stainless steel body construction, H-class heat-resistant coil, and PTFE (Teflon®) seals ensuring compatibility with multiple media, especially optimized for high-temperature water and saturated steam applications;
6. IP65-rated coil protection, available with direct lead wire or DIN connector electrical interfaces.
Category: Fluid Solenoid Valves | Brand: Airtac | Series: 2KL
AirTAC 2KL50050EI Solenoid Valve Technical Specifications
- Model: 2KL50050EI
- Series: 2KL High Flow Direct-Acting
- Valve type: 5/2-way (double solenoid)
- Port configuration: 1/4" BSPP (G1/4)
- Effective area: 50mm² (Cv=1.6)
- Operating pressure: 0.15–0.8 MPa (21.7–116 PSI)
- Voltage variants: DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation: Class F (155℃)
- Response time: ≤15ms (excitation), ≤20ms (reset)
- Ambient temperature: -20℃ to +80℃ (non-freezing)
- Fluid temperature: 0℃ to 60℃
- Seal material: HNBR (Hydrogenated Nitrile) with PTFE backup rings
- Body material: Anodized aluminum alloy (ADC12)
- Weight: 300g ±5% (excluding accessories)
- Dimensions: 100mm(L) × 50mm(W) × 50mm(H) (manifold surface excluded)
- Port thread depth: 10mm (4 full threads)
- Power consumption: 2.5W (DC), 3.5VA (AC)
- Protection rating: IP67 (coil), IP40 (valve body)
- Cycle rate: ≤5Hz (with recommended lubrication)
Industrial-grade 5/2-way solenoid valve engineered for high-speed automation systems requiring precise bi-directional control. Features dual manual override, surge suppression diodes, and optimized flow paths achieving 20% higher flow efficiency than standard models. Requires ISO 8573-1:2010 Class 3 compressed air (max 5mg/m³ oil content).
- Pneumatic cylinder sequencing in automotive assembly robots
- High-cycle packaging machinery with quick exhaust requirements
- Plastic injection molding machine clamp controls
- Electroplating line transfer systems with corrosive environments
- Textile machinery air logic control systems
Installation protocol:
Mount horizontally with pilot ports facing upward. Use flexible tubing for
vibration isolation in applications exceeding 15G acceleration.
Maintain 0.3-0.5MPa lubricator pressure when used with pneumatic oil mist.
Critical note:
Requires 5μm filtration (40μm for emergency use only).
Avoid continuous excitation beyond 120s - use intermittent duty cycle
(ON≤60s/OFF≥30s) for thermal management.
| Property | Property Value |
|---|---|
| sku | 2KL50050EI |
| Port Size | PT2 |
| Flow Aperture | <50mm> |
| Coil Voltage | AC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.