verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106B1FT

The AirTAC 3V1 Solenoid Valve 3V106B1FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC24V
  • Electrical entryDIN plug (DIN socket type)
  • Stations1
  • Series3V1
$25.47 $32.97Save 22% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106B1FT

One valve on a series base that can grow: the AirTAC 3V106B1FT is a single-station 3V1 assembly. The valve itself is direct-acting, 3/2, with one solenoid and a spring return - it either pressurises its outlet or exhausts it, which is exactly what single-acting cylinders, clamps, air-blow jets and pilot stages need.

The DC24V coil draws only 3.0 W, one of the lowest power figures in the AirTAC solenoid range, and the housing is rated IP65 (DIN 40050). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Genuine AirTAC components, sold through authorised distribution.

Airtac 3V1 Solenoid Valve 3V106B1FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106B1FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC24V
Electrical entryDIN plug (DIN socket type)
Coil power3.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106B1FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
1F1 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106B1FT Is Used

precision_manufacturing

CNC fixture clamps

Switches a small single-acting clamp cylinder on a machining fixture, venting it the moment the cycle ends so the part releases without trapped pressure.

air

PCB blow-off nozzle

Gates a short burst of clean shop air across a printed circuit board after soldering, with the 3.0 W DC24V coil driven straight from the machine's 24 V logic supply.

valve

Pilot for a process valve

Sends a pilot signal to a larger pneumatic process valve on a water treatment skid, letting a low-power DC24V output control a much bigger air actuator.

Is the Airtac 3V1 Solenoid Valve 3V106B1FT the Right Part?

The 3V1 is the smallest and lowest-power body in the AirTAC 3V range, and AirTAC publishes no Cv for it, so treat flow as an open question and confirm any demanding duty with us. Need more air per valve? Step up to 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, rated for vacuum) or 3V3 (1/4in, Cv 0.62); 3V2M is the pick when manifold density beats flow. Double-acting cylinders need the 5-port AirTAC 4V series, not a 3/2 valve.

Five points pin down your 3V106B1FT order: port (M5 or 1/8in), thread (NPT on this code), coil voltage, electrical entry (DIN plug or flying lead), and single valve versus a 1F-20F station assembly.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106B1FT FAQ

Operating pressure is 0-0.8 MPa (0-114 psi) and the medium temperature spans -20 to 70 C with clean air filtered through a 40 um or finer element. The DC24V coil absorbs 3.0 W and carries IP65 (DIN 40050) protection. The valve is direct-acting, 3/2, single solenoid with spring return. AirTAC publishes no Cv for the 3V1, so ask us before sizing a flow-critical circuit.

A 3/2 valve has three ports and two states: it either feeds the outlet or vents it to exhaust. That makes it right for single-acting spring-return cylinders, on/off air blow, clamping and piloting a larger valve - but never for a double-acting cylinder, which needs the 5-port AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106B1FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106B1FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.