verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106BI7FT

The AirTAC 3V1 Solenoid Valve 3V106BI7FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC24V
  • Electrical entryFlying lead (lead-out wire type)
  • Stations7
  • Series3V1
$170.15 $177.65Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106BI7FT

3V106BI7FT is a factory-built manifold of seven AirTAC 3V1 valves, each a 3/2 direct-acting unit with a single solenoid and spring return. Every station controls one line: it either feeds the outlet with compressed air or dumps it to exhaust, which suits single-acting cylinders, clamps, blow nozzles and pilot signals. The DC24V coils draw just 3.0 W each, so a whole seven-station block stays easy on your power supply.

Electrical entry is the flying-lead (I) version: each coil comes pre-wired with a lead-out instead of a DIN socket, which speeds up terminal-strip wiring in control cabinets. The valves share common supply and exhaust passages through the manifold base, cutting the number of separate fittings on the panel. IP65 (DIN 40050) coil protection and a manual override on every station round out the package. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V1 Solenoid Valve 3V106BI7FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106BI7FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC24V
Electrical entryFlying lead (lead-out wire type)
Coil power3.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106BI7FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
7F7 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106BI7FT Is Used

precision_manufacturing

Pick-and-place head clamping

Each 3/2 station vents or feeds one single-acting clamp cylinder on an SMT pick-and-place head, and the DC24V coils connect straight to the machine PLC's relay outputs.

air

Bottle-rinse blow-off row

Seven blow nozzles along a bottle-rinse conveyor get one valve each; the shared manifold base removes a tangle of separate fittings and their potential leak points.

valve

Pilot bank on a water-treatment skid

Use the 7 stations to pilot larger process valves in sequence; the 3.0 W coils and the manual override make commissioning of the skid straightforward.

Is the Airtac 3V1 Solenoid Valve 3V106BI7FT the Right Part?

The 3V1 is the smallest, lowest-power body in AirTAC's 3V range, so treat this 7-station assembly as a compact-signal solution rather than a high-flow one. No Cv is published for 3V1; if your duty is flow-critical, confirm the sizing with us before ordering. When you need more flow, step up to 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, and rated for vacuum) or 3V3 (1/4in, Cv 0.62). If manifold density matters more than flow, 3V2M is the dedicated choice. A double-acting cylinder takes a 5-port valve - point that application at the AirTAC 4V series.

Before you order, match five points: port (M5 or 1/8in), thread (NPT on this code), coil voltage, entry (DIN plug or flying lead), and station count - manifolds run from 1 to 20 stations, and this code fixes it at 7.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106BI7FT FAQ

It is a 3/2 direct-acting, single-solenoid, spring-return valve bank with seven stations on a shared base. Operating pressure is 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, and each DC24V coil draws 3.0 W (family-wide: AC220V and AC110V are 4.5 VA, AC24V 5.0 VA, DC12V 2.5 W). Protection is IP65 to DIN 40050. Air must be filtered to 40 um or finer and lubrication is not required. AirTAC publishes no Cv for the 3V1 body - ask us to confirm flow before you commit.

7F marks a 7-station manifold assembly in series. AirTAC builds the same 3V1 valve as individual units or as 1F to 20F manifolds, and each coil here takes 3.0 W at DC24V. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Note that 3V1 is supplied in a single fixed initial state - confirm it on the datasheet before wiring your interlock logic.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106BI7FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106BI7FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.