verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106C1FT

The AirTAC 3V1 Solenoid Valve 3V106C1FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC110V
  • Electrical entryDIN plug (DIN socket type)
  • Stations1
  • Series3V1
$25.47 $32.97Save 22% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106C1FT

3V106C1FT is the one-valve member of the 3V1 assembly range: a single 3/2 direct-acting, spring-return valve sitting on its own series base, the same mounting format AirTAC uses from 1F up to 20F. The AC110V coil needs just 4.5 VA and connects through a DIN plug. The valve is supplied in a single fixed initial state - confirm it on the datasheet.

In service it alternately feeds and vents one line - the pattern behind single-acting cylinder control, air blow, clamping and pilot duty. It runs on 0-0.8 MPa of air filtered to 40 um or finer (no lubrication required) between -20 and 70 C, is rated IP65 (DIN 40050), and its manual override makes setup and fault-finding simpler. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V1 Solenoid Valve 3V106C1FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106C1FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC110V
Electrical entryDIN plug (DIN socket type)
Coil power4.5 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106C1FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
1F1 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106C1FT Is Used

science

Analytical sample pusher

Cycles the small spring-return pusher that advances sample trays inside a laboratory analyser, on a coil that draws only 4.5 VA.

handyman

Welding-jig hold-down

Holds a bracket in a welding jig while the operator tacks it, then releases automatically when the coil drops.

shield

Guard-linked vent

Dumps the clamp line of a small press whenever its guard opens, with the spring return ensuring the line vents on power loss.

Is the Airtac 3V1 Solenoid Valve 3V106C1FT the Right Part?

Even for a single valve, size deliberately: 3V1 publishes no Cv, so anything flow-sensitive should be checked against the datasheet or quoted to us. If the duty needs more, 3V2 (1/8 and 1/4, NC or NO selectable, Cv 0.18-0.19, vacuum rated) and 3V3 (1/4, Cv 0.62) step up the flow; 3V2M is there when manifold density, not flow, is the priority; and double-acting cylinders call for the 5-port AirTAC 4V series instead.

Confirm five items before you order: port (M5 or 1/8), thread (NPT on this code), coil voltage, electrical entry (DIN plug or flying lead) and whether you want an individual valve or a numbered manifold station (1F-20F).

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106C1FT FAQ

Pressure range 0-0.8 MPa (0-114 psi); media temperature -20 to 70 C; protection IP65 (DIN 40050); coil power 4.5 VA on AC110V, with the family spanning AC220V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W and DC12V 2.5 W. AirTAC publishes no Cv or effective-area figure for 3V1 - request the datasheet for anything flow-sensitive.

AC110V matches the 110 V control circuits found in many machines and plants, and at 4.5 VA it is easy on the control transformer. The DIN plug lets the coil be unplugged without disturbing the wiring, which speeds swap-outs; if pre-wired leads suit the panel better, the same valve exists in a flying-lead entry to order.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106C1FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106C1FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.