verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106C2FT

The AirTAC 3V1 Solenoid Valve 3V106C2FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC110V
  • Electrical entryDIN plug (DIN socket type)
  • Stations2
  • Series3V1
$48.64 $56.14Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106C2FT

3V106C2FT is a two-station 3V1 manifold: two direct-acting 3/2 solenoid valves share one base, and each has three ports (supply, outlet, exhaust) with two states, so it feeds or vents one line at a time. That makes it the right switch for single-acting cylinders, air blow, clamps and pilot lines, and the spring returns every valve when power drops.

The AC110V coils draw just 4.5 VA each on DIN plug connections, the housing meets IP65 (DIN 40050), and a manual override on each station helps during installation and commissioning. Every valve we supply is a genuine AirTAC part. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V1 Solenoid Valve 3V106C2FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106C2FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC110V
Electrical entryDIN plug (DIN socket type)
Coil power4.5 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106C2FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
2F2 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106C2FT Is Used

science

Autosampler probe lift

A spring-return probe cylinder on a compact lab autosampler needs exactly one feed-or-vent valve; the two-station base covers probe and rinse positions.

air

PCB blow-off nozzle

Feed the nozzle while the board is in place and vent it when it moves on - a 3/2 spring-return valve is the classic blow-off switch on electronics benches.

tune

Bottling-line pilot signal

Use one station to pilot a larger process valve on a bottling carousel, keeping the whole pilot circuit on a single compact base.

Is the Airtac 3V1 Solenoid Valve 3V106C2FT the Right Part?

3V1 is the smallest, lowest-power body in AirTAC's 3V range, and no flow coefficient is published for it, so confirm any flow-critical duty with us before ordering. If a circuit needs more air, step up to 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or 3V3 (1/4in, Cv 0.62). Where manifold density matters more than flow, 3V2M is the alternative.

Before ordering, match five points: port (M5 or 1/8in), thread (NPT on this code), coil voltage, electrical entry (DIN plug or flying lead), and individual valve versus manifold station count. For a double-acting cylinder you need the 5-port AirTAC 4V series instead.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106C2FT FAQ

Operating pressure 0-0.8 MPa (0-114 psi), medium temperature -20 to 70 C, air filtered through a 40 um or finer element, protection IP65 (DIN 40050). Each AC110V coil draws 4.5 VA; DC24V would be 3.0 W and DC12V 2.5 W. No Cv or effective area is published for the 3V1 body, so confirm flow-critical duties with us.

Each valve is an independent 3/2 unit with its own AC110V DIN plug connection, spring return and manual override, while the shared base joins the supply. Accessories 3V1-P30, 3V1-P31 and 3V1-P32 cover connecting-screw bases, seals and bracket mounting. The valve drives single-acting cylinders, air blow or pilot duty, but never a double-acting cylinder - that needs a 5-port 4V valve.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106C2FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106C2FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.