verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106CI5FT

The AirTAC 3V1 Solenoid Valve 3V106CI5FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC110V
  • Electrical entryFlying lead (lead-out wire type)
  • Stations5
  • Series3V1
$120.29 $127.79Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106CI5FT

3V106CI5FT packs five 3/2 direct-acting valves into a single five-station 3V1 manifold on a 1/8 in NPT base. Each coil runs AC110V at 3.0 W and leaves the block as a flying lead, so the whole assembly wires with flexible leads rather than plug-in connectors. Spring return means every station reverts to its rest state as soon as power is removed.

Because a 3/2 valve has three ports and two states, each of the five stations either feeds its line or vents it to exhaust - the pattern behind single-acting cylinders, clamps, blow and pilot duty. Coil housings are IP65 (DIN 40050), a manual override aids commissioning, and the air supply needs only 40 um filtration. Each valve is supplied in a single fixed initial state - check it on the datasheet.

Airtac 3V1 Solenoid Valve 3V106CI5FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106CI5FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC110V
Electrical entryFlying lead (lead-out wire type)
Coil power4.5 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106CI5FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
5F5 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106CI5FT Is Used

factory

Carton diverter kickers

Five kick cylinders divert cartons between lanes on a packaging line, each one a single-acting unit fed and vented by its own station.

settings_input_component

Welding-fixture clamps

Five swing clamps on a weld fixture share one NPT1/8 manifold; the spring return drops every clamp safely when the AC110V coil de-energises.

speed

Fast pick-and-place lifters

Small single-acting lift cylinders on a high-cycle pick station cycle on 3.0 W coils, with no pilot air needed to reset them.

Is the Airtac 3V1 Solenoid Valve 3V106CI5FT the Right Part?

Since AirTAC lists no flow coefficient for 3V1, flow-sensitive applications should be checked against the duty before ordering. To gain capacity, move up to 3V2 - 1/8 in and 1/4 in ports, NC or NO selectable, Cv 0.18-0.19, vacuum rated - or to 3V3, a 1/4 in body with Cv 0.62. Where manifold density beats flow, 3V2M is the body designed for it. A double-acting cylinder sits outside a 3-port valve's reach, so route that requirement to the 5-port AirTAC 4V series.

Five details fix the order: M5 or 1/8 in port; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. coil voltage; DIN plug versus flying-lead entry; and whether you want an individual valve or a multi-station manifold of up to 20 stations.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106CI5FT FAQ

The assembly works from 0 to 0.8 MPa (0-114 psi) across -20 to 70 C, with IP65 (DIN 40050) coils. Power draw by voltage option: AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, AC110V 3.0 W, DC12V 2.5 W - each of the five stations here carries the 3.0 W AC110V coil. No flow coefficient or effective area exists in the 3V1 catalogue data, so ask us for flow-critical sizing.

Yes. The 3V1 code structure offers five voltages (A = AC220V, B = AC110V, C = AC110V, E = AC24V, F = DC12V), DIN plug or flying-lead entry, and manifolds from 1F to 20F. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Tell us the segments you need and we will quote the matching assembly.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106CI5FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106CI5FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.