verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106CI8FT

The AirTAC 3V1 Solenoid Valve 3V106CI8FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC110V
  • Electrical entryFlying lead (lead-out wire type)
  • Stations8
  • Series3V1
$192.49 $199.99Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106CI8FT

The 3V106CI8FT is a factory-integrated manifold assembly of eight AirTAC 3V106CI valves - 1/8in NPT ports, AC110V coils at 4.5 VA, each with flying leads - mounted in series on a common base. Eight 3/2-way, direct-acting, spring-return valves in one block replace eight separate bodies, their individual plumbing and their brackets.

Every station still switches its own line between feed and exhaust, so the block runs single-acting cylinders, clamps, blow nozzles or pilot signals independently. IP65 sealing to DIN 40050 covers the coils, and air fed to the base must be filtered to 40 um or finer; lubrication is not required.

Airtac 3V1 Solenoid Valve 3V106CI8FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106CI8FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC110V
Electrical entryFlying lead (lead-out wire type)
Coil power4.5 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106CI8FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
8F8 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106CI8FT Is Used

build

Clamp bank on a welding fixture

Eight spring-return swing clamps around an automotive sub-assembly jig are fed and vented from one manifold block, cutting plumbing versus eight loose valves.

view_module

Grippers on a modular sorter

Each pocket of a small parts sorter gets its own 3/2 station to actuate a single-acting gripper, while one common supply serves the whole 8-station base.

science

Sample tray automation in a lab

Drives small single-acting pushers that index sample trays through a laboratory analyser, all switched from one compact 8-valve block with flying-lead coils.

Is the Airtac 3V1 Solenoid Valve 3V106CI8FT the Right Part?

Count your stations before ordering: the 3V1 manifold is offered from 1F to 20F, and this code fixes eight. Because AirTAC publishes no Cv for the 3V1 body, treat it as a low-flow, low-power family - the smallest in the 3V range - and step up to 3V2 (Cv 0.18-0.19, NC or NO selectable, vacuum rated) or 3V3 (1/4in, Cv 0.62) when a station needs real flow. If manifold density outweighs flow, 3V2M is the alternative body.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Need double-acting cylinders driven? That is a 5-port job for the AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106CI8FT FAQ

It combines eight 3/2-way direct-acting, spring-return valves on one base, each a NPT1/8in port with an AC110V 4.5 VA flying-lead coil. Pressure range 0-0.8 MPa (0-114 psi), temperature -20 to 70 C, IP65 to DIN 40050, air filtered to 40 um or better. AirTAC publishes no Cv or effective area for 3V1 - confirm flow suitability with us for flow-critical stations.

The 3V1 family is catalogued from 1F to 20F stations, so a different count is ordered as a separate assembly code rather than rebuilt in the field. Each station is an independent 3/2 valve that feeds or vents its own line - ideal for single-acting cylinders and pilots, not for double-acting cylinders, which require the 5-port AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106CI8FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106CI8FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.