verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106E3FT

The AirTAC 3V1 Solenoid Valve 3V106E3FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Stations3
  • Series3V1
$72.20 $79.70Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106E3FT

The 3V106E3FT keeps things small: a three-station block of 3/2-way direct-acting valves on a shared 1/8in NPT base, each station driven by a 5.0 VA AC24V coil with spring return. One valve can feed a line while its neighbours vent theirs, so a compact machine section - say a clamp, a blow tip and a pilot signal - runs from one mounting point.

It is a genuine AirTAC assembly: IP65 (DIN 40050) coils on DIN sockets, a manual override on every station, and no lubrication needed provided the air is filtered through a 40 um or finer element. Expansion stays simple because the same family runs up to 20 stations on a base.

Airtac 3V1 Solenoid Valve 3V106E3FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106E3FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power5.0 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106E3FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
3F3 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106E3FT Is Used

handyman

Bench-mounted jig for small bracket welding

Three stations cover the clamp, the part-eject pusher and a cooling air puff, so one compact block runs the whole jig instead of three loose valves and hoses.

factory

Capper head on a small bottling line

One station drives the single-acting cap-press cylinder, another blows the empty bottle neck clear, and the third pilots the cap-feed gate - all spring-return.

tune

Air-knife adjustment on a coating line

Three low-power stations trim and vent three air-knife lines during recipe changes; the manual override lets an operator set each jet by hand before the coil takes over.

Is the Airtac 3V1 Solenoid Valve 3V106E3FT the Right Part?

Flow data is the gap here: 3V1 carries no published Cv, so if a duty is flow-sensitive, confirm the sizing with us first. The natural upgrades are 3V2 (1/8in and 1/4in bodies, selectable NC or NO, Cv 0.18-0.19, vacuum rated) and 3V3 (1/4in, Cv 0.62); 3V2M is the answer when you want the tightest manifold pitch rather than more flow. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Double-acting cylinders need the 5-port AirTAC 4V series, not a 3/2 valve.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106E3FT FAQ

A three-station 3/2 manifold: each valve is direct-acting, single-solenoid, spring-return, with 1/8in NPT ports. Pressure span 0-0.8 MPa (0-114 psi); temperature -20 to 70 C; coil enclosure IP65 (DIN 40050). Coil power options run AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W - this block is AC24V throughout. AirTAC states no Cv for the 3V1 body, so flow-critical choices deserve a quick check with us.

One base, one mounting, three fewer plumbing interfaces - and the same family scales from 1F to 20F if the machine grows. Each station still acts independently, feeding or venting one line: a single-acting cylinder, a blow nozzle or a pilot signal. Remember that no 3/2 valve, this one included, can drive a double-acting cylinder; that job belongs to the 5-port AirTAC 4V range.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106E3FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106E3FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.