verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106E6FT

The AirTAC 3V1 Solenoid Valve 3V106E6FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Stations6
  • Series3V1
$144.95 $152.45Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106E6FT

Six independent 3/2 valves share a single NPT1/8 manifold in the 3V106E6FT assembly, each valve direct-acting with a single AC24V solenoid and spring return. One station can feed a line while another vents it, covering single-acting cylinders, clamps, blow-off and pilot duty from one air connection.

Because all six coils draw just 5.0 VA at AC24V, a small control transformer can drive the whole assembly, and IP65 (DIN 40050) sealing protects the DIN plug connections on dusty machine frames. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V1 Solenoid Valve 3V106E6FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106E6FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power5.0 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106E6FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
6F6 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106E6FT Is Used

conveyor_belt

Sorting gate bank on a parcel line

Each of the six gates gets its own 3/2 valve, so diverters can fire in any sequence while sharing one manifold supply.

build

Fixture clamp array in a welding cell

Low-power AC24V coils let a safety-rated control circuit energise six clamps, all venting to exhaust on power loss.

tune

Nozzle sequencing on a filling carousel

Blow-clear nozzles are switched station by station without a cabinet full of separate valves and fittings.

Is the Airtac 3V1 Solenoid Valve 3V106E6FT the Right Part?

Manifold density is where the 3V1 body earns its place: up to 20 valves can be mounted in series, so a 6-station assembly like this leaves room to grow without re-plumbing. Note that 3V1 has no published Cv - if the duty is flow-critical, confirm sizing with us first, or step up to 3V2 (Cv 0.18-0.19, 1/8in or 1/4in, NC or NO selectable, vacuum capable) or 3V3 (1/4in, Cv 0.62). 3V2M wins when a dense manifold matters more than flow.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For double-acting cylinders you need the 5-port AirTAC 4V series instead.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106E6FT FAQ

Pressure 0-0.8 MPa (0-114 psi); temperature -20 to 70 C; AC24V coil power 5.0 VA (other voltages: AC220V/AC110V 4.5 VA, DC24V 3.0 W, DC12V 2.5 W); IP65 to DIN 40050; air filtered to 40 um or finer, no lubrication needed; manual override fitted. No Cv or effective-area figure is published for 3V1.

A shared NPT1/8 base means one air connection, fewer fittings and less panel space, and the series mounting accepts 1 to 20 stations. Each valve still acts independently, driving single-acting cylinders, blow or pilot duty - but never a double-acting cylinder, which needs an AirTAC 4V 5-port valve.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106E6FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106E6FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.