verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106F4FT

The AirTAC 3V1 Solenoid Valve 3V106F4FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryDIN plug (DIN socket type)
  • Stations4
  • Series3V1
$96.86 $104.36Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106F4FT

Four independent 3/2 direct-acting valves share a single 1/8in NPT base in the 3V106F4FT. Each station feeds or vents its own line, so one assembly can run a single-acting cylinder, a clamp, a blow nozzle and a pilot stage from the same compact footprint. Spring return makes every station fail back to its rest state when the 12 V signal drops.

The DC12V coils draw 2.5 W apiece - four of them still sit lightly on a vehicle or cabinet 12 V rail. IP65 (DIN 40050) coil housings shrug off washdown-side dust and splashes, the manual override on each station lets you jog the machine by hand during commissioning, and DIN plugs keep the harness serviceable. Genuine AirTAC 3V1 hardware, quoted on request.

Airtac 3V1 Solenoid Valve 3V106F4FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106F4FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryDIN plug (DIN socket type)
Coil power2.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106F4FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
4F4 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106F4FT Is Used

factory

Assembly-bench clamp fixtures

Four fixtures on one welding jig each get a dedicated valve; every spring-return clamp cylinder vents automatically whenever the 12 V control rail drops.

cable

Towable compressor controls

Vehicle-grade 12 V wiring pairs naturally with the 2.5 W coils, and the DIN plugs allow the whole harness to be unplugged when the trailer is parked up.

tune

Label-head dwell cylinder

A single-acting dwell cylinder on a labelling head is pressed and released each cycle, with the manual override used to index the machine by hand at set-up.

Is the Airtac 3V1 Solenoid Valve 3V106F4FT the Right Part?

Before ordering, lock down five choices on the 3V106F4FT: the port (M5 or 1/8in), the thread (NPT on this code), the coil voltage, the electrical entry (DIN plug here, flying lead on the I-suffix codes), and the station count, which runs from 1F to 20F across the range. There is no published Cv for the 3V1 body, so flow-critical sizing needs our confirmation. For higher flow per circuit, compare the 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) and the 3V3 (1/4in, Cv 0.62); for the densest manifold layout, 3V2M wins. Double-acting cylinders are a 5-port AirTAC 4V job.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106F4FT FAQ

Operating pressure 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, DC12V coil power 2.5 W per station, protection IP65 (DIN 40050), air filtered to 40 um or finer with no lubrication required. AirTAC states no Cv or effective-area figure for the 3V1, so flow-dependent choices should be confirmed with us.

Yes in principle - the 3V1 manifold concept runs from 1F to 20F, so assemblies of up to 20 valves can share one series base, and 4F is simply one step on that ladder. Supporting hardware includes the 3V1-P30 connecting-screw base set, the 3V1-P31 O-ring and long-screw kit and the 3V1-P32 mounting brackets. Tell us the exact station count you need when you request a quote.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106F4FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106F4FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.