verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106F5FT

The AirTAC 3V1 Solenoid Valve 3V106F5FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryDIN plug (DIN socket type)
  • Stations5
  • Series3V1
$120.29 $127.79Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106F5FT

The 3V106F5FT carries five direct-acting 3/2 valves on a single NPT1/8 base, consolidating five control circuits into one manifold that mounts and plumbs as a unit. Each valve does one simple job - pressurise its outlet, or dump that line to exhaust - which is exactly what single-acting cylinders, clamps, nozzles and pilot stages need.

At 2.5 W per DC12V coil, five stations still present only a light load on a 12 V supply, and the spring-return design sends every line to its rest state whenever power is lost. Coils meet IP65 (DIN 40050), each station has a manual override for dry commissioning, and DIN plug connections keep replacement quick. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V1 Solenoid Valve 3V106F5FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106F5FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryDIN plug (DIN socket type)
Coil power2.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106F5FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
5F5 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106F5FT Is Used

conveyor_belt

Sorting-gate diverters on a parcel conveyor

Five spring-return diverter gates along a sortation line are each fed and vented by one valve station, all falling open when the 12 V control signal stops.

valve

Pilot stage for larger process valves

Selected stations act as low-power pilots that snap larger spring-return process valve actuators open and closed from a 12 V loop.

view_module

Modular welding fixture plate

A five-point modular fixture uses one manifold station per clamp point; each single-acting clamp releases the moment its coil is de-energised.

Is the Airtac 3V1 Solenoid Valve 3V106F5FT the Right Part?

Five stations is where the 3V1 manifold idea earns its keep, but it is still worth sizing against the rest of the range: the 3V2 offers 1/8in and 1/4in ports with NC or NO selectability, Cv 0.18-0.19 and a vacuum rating, the 3V3 gives 1/4in ports at Cv 0.62, and the 3V2M is built for maximum manifold density. Because AirTAC publishes no Cv for the 3V1, confirm any flow-sensitive duty with us. Your five-point check for the 3V106F5FT: port (M5 or 1/8in), thread (NPT on this code), coil voltage, entry (DIN plug or flying lead) and station count. For double-acting actuators, move to the 5-port AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106F5FT FAQ

Operating pressure 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, DC12V coil power 2.5 W per valve, protection IP65 (DIN 40050), air filtered through a 40 um or finer element, lubrication not required. AirTAC publishes no Cv or effective area for the 3V1 body, so verify flow requirements with us.

Each of the five valves has three ports (supply, outlet, exhaust) and two positions: it either pressurises its outlet or vents that line to exhaust. That behaviour fits single-acting spring-return cylinders, clamps, air-blow nozzles and piloting larger valves. It will not run a double-acting cylinder, which needs pressure and exhaust managed in both directions - use the 5-port AirTAC 4V series for that.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106F5FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106F5FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.