verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106F9FT

The AirTAC 3V1 Solenoid Valve 3V106F9FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryDIN plug (DIN socket type)
  • Stations9
  • Series3V1
$217.83 $225.33Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106F9FT

Nine direct-acting 3/2 valves share one 1/8in NPT base in the AirTAC 3V106F9FT, each with a single solenoid and spring return. Energise a coil and the outlet feeds its line; cut power and the spring vents that line to exhaust - the behaviour single-acting cylinders, blow nozzles and pilot stages depend on.

The DC12V coils draw just 2.5 W each, which makes this body a natural pick for 12 V control systems and battery-fed equipment, and every coil housing is IP65 (DIN 40050). Supply air must pass a 40 um or finer filter; no lubrication is needed, and each of the nine stations has a manual override for commissioning.

Airtac 3V1 Solenoid Valve 3V106F9FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106F9FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryDIN plug (DIN socket type)
Coil power2.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106F9FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
9F9 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106F9FT Is Used

speed

Stamped-part ejection

A spring-return ejector blows small pressed parts clear of a die at high cycle, driven from one 12 V-fed station of the bank.

local_shipping

Trailer-mounted rig

On a trailer-mounted spray rig running from a 12 V battery, individual stations switch spray-air and clamp lines without any mains supply.

handyman

Workshop jig clamping

A small workshop jig uses two of the nine stations for hold-down clamps and a third to feed a cleaning blow-off gun.

Is the Airtac 3V1 Solenoid Valve 3V106F9FT the Right Part?

The 3V1 is the smallest and least power-hungry body in AirTAC's 3V range, but AirTAC publishes no Cv for it, so confirm any flow-critical duty with us before ordering. When the duty outgrows it, step up to 3V2 (1/8in or 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or 3V3 (1/4in, Cv 0.62); 3V2M is the answer when a dense manifold matters more than flow. A double-acting cylinder needs a 5-port valve - go to the AirTAC 4V series.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G and NPT are order options), the DC12V coil, flying-lead versus DIN entry, and whether nine manifold stations beat individual valves for your layout.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106F9FT FAQ

Working pressure 0-0.8 MPa (0-114 psi); temperature -20 to 70 C; IP65 (DIN 40050) coils; 1/8in NPT ports; manual override per station. Coil power depends on voltage: AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W (this version). Air must pass a 40 um or finer filter, without lubrication. No Cv or effective area figure exists for 3V1 - check with us if flow matters.

The 3V1 ordering code carries no NC/NO position, so there is no choice to make at order time: the valve is supplied in a single fixed initial state - confirm it on the datasheet before you design the circuit. What you do choose is voltage (DC12V here), electrical entry (flying lead on this code), thread and the number of manifold stations.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106F9FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106F9FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.