verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

Airtac 3V1 Solenoid Valve 3V106FI5FT

The AirTAC 3V1 Solenoid Valve 3V106FI5FT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryFlying lead (lead-out wire type)
  • Stations5
  • Series3V1
$120.29 $127.79Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V1 Solenoid Valve 3V106FI5FT

The 3V106FI5FT is built around AirTAC's 12 V DC coil, which draws just 2.5 W per station - low enough for battery-backed or vehicle-derived supplies on machines where a mains rail is unwanted. Five direct-acting 3/2 valve units share one manifold base with 1/8in NPT ports.

Functionally, each station either pressurises its outlet or exhausts it, and the spring sets the state whenever the coil de-energises. Flying leads come out of each coil for direct hookup, the IP65 housing keeps dust and splash out, and a manual override lets you jog every station during commissioning - handy for proving each output before go-live. Product is genuine AirTAC, quoted through our RFQ desk.

Airtac 3V1 Solenoid Valve 3V106FI5FT Technical Specifications

ModelAirtac 3V1 Solenoid Valve 3V106FI5FT
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryFlying lead (lead-out wire type)
Coil power2.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: Airtac 3V1 Solenoid Valve 3V106FI5FT

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
5F5 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V1 Solenoid Valve 3V106FI5FT Is Used

conveyor_belt

Five-lane bottle reject gates

A juice filler kicks under-filled bottles off each lane; five 3/2 stations pulse single-acting ejector cylinders from one shared manifold base.

bolt

Welding fixture clamp bank

Five swing clamps on a bracket-welding fixture are held by spring force and released by 12 V coil pulses, with flying leads wired straight into the fixture junction box.

tune

Skid pilot stages

On a compact water-treatment skid, the 3/2 stations pilot larger diaphragm process valves, switching each between feed and vent states on demand.

Is the Airtac 3V1 Solenoid Valve 3V106FI5FT the Right Part?

Size the 3V106FI5FT both ways. Upward: if any line needs more flow than this smallest 3V body can pass - no Cv is published for 3V1 - move to 3V2, which covers 1/8in and 1/4in with selectable NC or NO function, Cv 0.18-0.19 and a vacuum rating, or to the 1/4in 3V3 at Cv 0.62. On density: 3V2M packs valves even tighter when manifold space, not flow, is the constraint.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Double-acting actuators belong on the 4V series, not here.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V1 Solenoid Valve 3V106FI5FT FAQ

Pressure range 0-0.8 MPa (0-114 psi); temperature -20 to 70 C; coil power AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W (fitted here: DC12V at 2.5 W per station); IP65 to DIN 40050; medium is air filtered to 40 um or better, no lubrication needed. AirTAC publishes no Cv or effective-area figure for the 3V1, so treat flow-critical sizing as an item to confirm with us.

The I in 3V106FI5FT means each coil is supplied pre-wired with a lead-out instead of a DIN socket, which suits low-voltage panels, battery supplies and vehicles where a 12 V rail already exists. At 2.5 W per station the draw is minimal. If your control system prefers 220 V or 24 V plug-in coils, ask us for the equivalent DIN-entry codes.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V1 Solenoid Valve 3V106FI5FT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106FI5FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.