verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V1 · 3/2-Way Solenoid Valve

AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT)

The AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Port size1/8 in
  • Coil voltageDC24V
  • Electrical entryDIN plug (DIN socket type)
  • Stations17
  • Series3V1
$411.55 $419.05Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V1-06 voltage, entry and configuration on one page All 3V1-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT)

Seventeen 3V1 3/2 sections on one base make the 3V106B17FT a compact alternative to wiring seventeen separate valves. Direct-acting and single-solenoid, each section feeds or vents its line and springs back when de-energised, so it drives single-acting cylinders, clamps, blow-off jets or pilots a larger valve.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Coil protection is IP65 (DIN 40050), every valve carries a manual override, and the medium should be filtered to 40 um or finer with no lubrication required.

AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT) Technical Specifications

ModelAirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT)
Series3V1
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Port size1/8 in
ThreadNPT
Coil voltageDC24V
Electrical entryDIN plug (DIN socket type)
Coil power3.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceNot rated for vacuum
Flow coefficientNot published for 3V1
Temperature-20 to 70 C
ConstructionDirect-acting, single solenoid, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

3V1 has no published flow coefficient. There is no Cv and no effective-area figure for this body in the source, so we do not print one. If the duty is flow-critical, ask us and we will confirm it, or step up to 3V2 (Cv 0.18-0.19) or 3V3 (Cv 0.62).

Model Code: AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT)

3V1Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
17F17 stations in one assembly.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT) Is Used

conveyor_belt

Conveyor stopper gates

Single-acting stopper cylinders that pause totes between conveyor zones, each fed and vented by its own 3/2 section so loads release cleanly on power loss.

science

Benchtop test rig actuation

Compact single-acting lift and clamp actuators on an automated test bench, driven section by section with manual overrides for debugging a cycle.

factory

Textile machine thread cutters

Short-burst air pulses to cutter and kicker cylinders on a weaving line, switched at seventeen stations from one shared NPT1/8 supply.

Is the AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT) the Right Part?

Check flow before choosing a seventeen-station 3V1 bank: AirTAC publishes no Cv for the 3V1, so confirm any flow-critical duty with us first. Where 1/8 or 1/4 ports need more capacity, the 3V2 (NC or NO selectable, Cv 0.18-0.19, vacuum rated) or the 1/4-port 3V3 (Cv 0.62) are the natural steps up; 3V2M wins when manifold density, not flow, is the priority.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Double-acting cylinders need the AirTAC 4V series, not this 3/2 body.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Blank any unused station on the base before pressurising.
  • check Wiring by qualified personnel, per AirTAC documentation.

AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT) FAQ

Start with the envelope: 0-0.8 MPa (0-114 psi) operating pressure, -20 to 70 C media temperature, IP65 (DIN 40050) coils, and 4.5 VA per DC24V section. The 3V1 coil table is DC24V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W. The flow coefficient is not published for this body - send flow-critical duties to us for confirmation.

The 3V106B17FT uses DIN plug sockets, so valves unclip from the manifold for service and wiring runs through plug connectors. The 3V1 family also offers an I-suffix flying-lead entry with pre-wired lead-out wires - pick that when the sockets are hard to reach. Either way the coil here is DC24V at 4.5 VA and rated IP65 with the plug fitted.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 3V106A-17 Solenoid Valve, 3V1 Series (3V106B17FT)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V106B17FT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.