verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NCET

The AirTAC 3V2 Solenoid Valve 3V206NCET is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/8 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.18
  • Series3V2
$48.72 $56.22Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NCET

A normally closed 3/2 valve with a 24V AC coil: energise it and the 1/8 inch NPT port feeds the outlet, de-energise and the spring vents that line to exhaust. Running on AC24V keeps the switched voltage low near operators, which many machine safety specs favour, while the DIN plug entry keeps coil replacement tool-free.

Inside is a coaxial poppet rather than a spool, giving positive shut-off at Cv 0.18 per port (3.2 mm2). The coil is IP65 sealed, and the body is one of the few in this size class rated for vacuum, from -102.2 kPa to 0.1 MPa.

Airtac 3V2 Solenoid Valve 3V206NCET Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NCET
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/8 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NCET

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NCET Is Used

conveyor_belt

Conveyor air-knife blow-off

A normally closed 3/2 gates a nozzle jet that clears dust from cartons on a belt; AC24V keeps the valve feed within low-voltage panel rules.

handyman

Bench pneumatic fixture clamping

Workshop jigs use the valve to feed a single-acting hold-down; with the DIN plug pulled, maintenance staff can purge the clamp line in seconds.

settings_input_component

Pilot signal for a large process valve

The 3/2 switches the pilot port of a bigger AirTAC actuated valve, translating a 24V control signal into a pneumatic command.

Is the Airtac 3V2 Solenoid Valve 3V206NCET the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Other voltage codes (AC220V, AC110V, DC24V, DC12V) exist in the same 3V2 family if your control supply differs.

For sizing context: down-scale to 3V1 when a small duty and its 3.0 W DC24V coil beat the 7 VA here, or to 3V2M where a Cv 0.1 manifold saves space across many stations; scale up to 3V3 (1/4 inch, Cv 0.62, vacuum-rated too) for substantially higher flow. Double-acting cylinders belong on the AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NCET FAQ

Per-port flow: 3V206 (1/8in) is 3.2 mm2 effective area, Cv 0.18; 3V208 (1/4in) is 3.4 mm2, Cv 0.19. Operating pressure is 0-0.8 MPa (0-114 psi), with vacuum service rated -102.2 kPa to 0.1 MPa. Temperature range is -20 to 70 C. Coil power is 7 VA on AC and 7.0 W on DC. Coil protection is IP65 (DIN 40050).

Normally closed (this model) leaves the outlet vented until the coil is energised - the safe default for clamps, blow-off and pilots. A normally open version passes air until energised, useful for fail-vent or continuously-fed duties. The state is selected at ordering; verify your fail-safe requirement against the machine risk assessment.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NCET

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NCET and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.