verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NCFIT

The AirTAC 3V2 Solenoid Valve 3V206NCFIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.18
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NCFIT

The 3V206NCFIT is the flying-lead version of the 3V2 in NC, DC12V, 1/8in: a pre-wired lead-out replaces the DIN socket, so the coil connection arrives on the valve and no separate plug goes on the bill of materials. Normally closed means the coaxial poppet stays shut on its spring, venting the outlet until the coil pulls it open.

The 1/8in NPT port flows Cv 0.18 (3.2 mm2). Coil draw is 7.0 W on DC12V, sealing is IP65, and the body is rated for vacuum service from -102.2 kPa to 0.1 MPa. Order this genuine AirTAC valve by RFQ.

Airtac 3V2 Solenoid Valve 3V206NCFIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NCFIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryFlying lead (lead-out wire type)
Coil power7.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NCFIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NCFIT Is Used

air

Bench-top leak rigs

Test benches for fittings and hoses use the lead-out wires to take the valve straight into a 12V control relay, with the NC state isolating the part under test between cycles.

precision_manufacturing

Vacuum end-of-arm tooling

A cobot gripper switching suction down to -102.2 kPa benefits from flexible lead routing on a moving arm, where a rigid DIN plug can work loose over thousands of cycles.

local_shipping

Trailer auxiliary circuits

On delivery-vehicle auxiliary controls the DC12V coil matches the truck battery, and the NC default vents the actuator line whenever the ignition is off.

Is the Airtac 3V2 Solenoid Valve 3V206NCFIT the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If leads are not wanted, the plain 3V206NCF takes a DIN plug instead. Where coil power is the constraint, 3V1 drops to 3.0 W on DC24V but loses the vacuum rating; where valve count per panel matters more than flow, 3V2M sits on a shared base at Cv 0.1.

This 3V2 stays the pick when an independently plumbed valve at Cv 0.18 is needed. For much larger flow, 3V3 offers Cv 0.62 on a 1/4in port and keeps the vacuum rating. Double-acting cylinders belong on the 5-port AirTAC 4V range.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NCFIT FAQ

Effective area and Cv are 3.2 mm2 / 0.18 on the 1/8in 3V206 body and 3.4 mm2 / 0.19 on the 1/4in 3V208. Operating pressure 0-0.8 MPa; vacuum service -102.2 kPa to 0.1 MPa; temperature -20 to 70 C; coil power 7.0 W DC or 7 VA AC; ingress protection IP65 (DIN 40050). Air must be filtered to 40 um or finer and needs no lubrication.

Yes - the 3V2 body is rated from -102.2 kPa to 0.1 MPa for negative-pressure service, a rating the 3V1 and 3V2M families do not carry. The source gives no vacuum flow figure, so confirm performance from the datasheet before sizing a vacuum application.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NCFIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NCFIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.