verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NCFT

The AirTAC 3V2 Solenoid Valve 3V206NCFT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/8 in
  • Coil voltageDC12V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.18
  • Series3V2
$48.60 $56.10Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NCFT

3V206NCFT is a 3/2-way, normally closed solenoid valve with a NPT1/8 port. At rest the spring holds the outlet vented, so no air reaches the line until the DC12V coil is energised - a fail-safe posture for clamps and blow circuits. It is direct-acting with a coaxial poppet, sealing on a single axis with no minimum pilot pressure to shift.

Flow through the 1/8in port is Cv 0.18 (3.2 mm2 effective area). The body is rated for negative pressure from -102.2 kPa to 0.1 MPa, a rating the 3V1 and 3V2M families do not carry, so this one valve can switch both pressure and vacuum circuits. Genuine AirTAC part, quoted on RFQ. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V206NCFT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NCFT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/8 in
ThreadNPT
Coil voltageDC12V
Electrical entryDIN plug (DIN socket type)
Coil power7.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NCFT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NCFT Is Used

cable

12V mobile equipment

Battery-fed circuits on service trucks and agricultural sprayers: the 7.0 W DC12V coil runs straight from the vehicle supply without a converter, and the NC state keeps the blow nozzle shut when the power is off.

shield

Fail-secure clamping

A spring-return clamp on a packaging machine stays released whenever power is lost, because the normally closed valve vents the cylinder port as its default condition.

science

Vacuum pick-and-place

On a small PCB gantry the valve switches vacuum lines down to -102.2 kPa, holding suction cups between pick and release without a separate vacuum valve.

Is the Airtac 3V2 Solenoid Valve 3V206NCFT the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If the machine is battery-fed and every watt counts, the 3V1 series drops coil draw to 3.0 W on DC24V - but it gives up the vacuum rating. When many stations must share one base, the 3V2M manifold version trades flow (Cv 0.1) for density; keep this individually ported 3V2 when flow matters.

Need a bigger orifice? 3V3 gives a 1/4in port at Cv 0.62 and stays vacuum-rated. For a double-acting cylinder you need a 5-port valve - go to the AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NCFT FAQ

The 1/8in port gives 3.2 mm2 effective area, Cv 0.18; the 1/4in 3V208 body gives 3.4 mm2, Cv 0.19. Pressure range is 0-0.8 MPa, vacuum rating -102.2 kPa to 0.1 MPa, media temperature -20 to 70 C, coil power 7.0 W on DC (7 VA on AC), protection IP65. Filter the air to 40 um or finer; lubrication is not required.

No. With three ports and two states a 3V2 either feeds the outlet or vents it to exhaust, which suits single-acting spring-return cylinders, air blow, clamps and pilot duty. A double-acting cylinder needs a 5-port valve such as the AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NCFT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NCFT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.