verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NOBIT

The AirTAC 3V2 Solenoid Valve 3V206NOBIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/8 in
  • Coil voltageDC24V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.18
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NOBIT

On the 3V206NOBIT the electrical connection is a pre-wired flying lead instead of a DIN socket, so the coil can be run straight to a junction box or controller output where a plug socket will not fit. Functionally it is a normally open 3/2 direct-acting valve: air passes from supply to outlet at rest, and energising the coil closes it and vents the downstream line.

The coaxial poppet, spring-return design is rated 0-0.8 MPa and down to -102.2 kPa for vacuum service. At the 1/8in port size the flow coefficient is Cv 0.18 (3.2 mm2 effective area) per port, and the DC24V coil consumes 7.0 W. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V206NOBIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NOBIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/8 in
ThreadNPT
Coil voltageDC24V
Electrical entryFlying lead (lead-out wire type)
Coil power7.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NOBIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NOBIT Is Used

valve

Vacuum cup sheet lifter

The -102.2 kPa vacuum rating lets this NO valve hold a vacuum line open to suction cups on a sheet-lifting gantry and shut it under PLC control.

precision_manufacturing

Robot end-of-arm ejector

A flying lead suits the constant flexing at a robot wrist, feeding a small single-acting cylinder that kicks finished parts off the fixture.

conveyor_belt

Packaging line air knife

Air flows to an air knife on a conveyor as soon as the line is supplied; energising the coil stops the blow during changeover.

Is the Airtac 3V2 Solenoid Valve 3V206NOBIT the Right Part?

This 1/8in body is the right size when Cv 0.18 per port is enough; there is little to gain from stepping to 1/4in, since the 3V208 lifts the coefficient only to Cv 0.19 - a real jump requires the 3V3 (1/4in, Cv 0.62, vacuum-rated). Go smaller with the 3V1 when low coil power matters (3.0 W on DC24V), or to the 3V2M manifold version when many stations must share one base and Cv 0.1 per station is acceptable.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Double-acting cylinder control belongs to the 5-port AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NOBIT FAQ

Per-port flow is 3.2 mm2 effective area, Cv 0.18 at 1/8in; the 1/4in 3V208 body rises to 3.4 mm2 and Cv 0.19. Pressure range is 0-0.8 MPa and vacuum service is rated -102.2 kPa to 0.1 MPa. It works from -20 to 70 C with air filtered to 40 um or finer, the DC24V coil takes 7.0 W (AC coils 7 VA) and the rating is IP65 (DIN 40050).

No. A 3/2 valve has three ports and two states, so it either feeds a line or vents it - that covers single-acting spring-return cylinders, blow, clamps, vacuum switching and pilot duty. A double-acting cylinder needs two outlet lines simultaneously, which calls for a 5-port valve such as the AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NOBIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NOBIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.