verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NOCIT

The AirTAC 3V2 Solenoid Valve 3V206NOCIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/8 in
  • Coil voltageAC110V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.18
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NOCIT

Few small 3/2 valves switch vacuum as well as pressure; the AirTAC 3V206NOCIT is rated from -102.2 kPa to 0.1 MPa, so the same normally open valve can interrupt a vacuum line or a compressed-air line on one machine. It is direct-acting with a coaxial poppet and spring return, and its AC110V coil arrives on a pre-wired flying lead for direct connection to a control panel.

Normally open means the outlet is fed the moment supply air (or vacuum) is applied; energising the solenoid closes the path and vents the line. Flow at the NPT1/8 port is Cv 0.18, 3.2 mm2 effective area per port, with 7 VA coil draw on AC. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V206NOCIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NOCIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/8 in
ThreadNPT
Coil voltageAC110V
Electrical entryFlying lead (lead-out wire type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NOCIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NOCIT Is Used

science

Lab vacuum manifold switching

The -102.2 kPa to 0.1 MPa rating lets a laboratory manifold switch vacuum lines and compressed air with one valve type.

view_module

Carousel indexer release

A single-acting indexer pin on a rotary carousel stays fed while the coil is off and exhausts when the AC110V solenoid cuts the path.

local_shipping

Trailer brake test rig

Flying leads suit a hand-wired test bench, where the valve cycles vacuum and pressure lines on trailer brake components.

Is the Airtac 3V2 Solenoid Valve 3V206NOCIT the Right Part?

Size down to the 3V1 when the duty is light and coil power counts (3.0 W on DC24V against 7 VA here), or to the 3V2M where a multi-station manifold matters more than flow - its base routing holds Cv to 0.1. For much higher flow, the 3V3 (1/4in, Cv 0.62, vacuum-rated) is the move; stepping to a 1/4in 3V208 only lifts Cv to 0.19.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Moving a double-acting cylinder? Use the 5-port AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NOCIT FAQ

Flow per port is Cv 0.18 with a 3.2 mm2 effective area at 1/8in (1/4in 3V208: Cv 0.19, 3.4 mm2). Pressure spans 0-0.8 MPa and vacuum duty is rated -102.2 kPa to 0.1 MPa. Operating temperature is -20 to 70 C, AC coils draw 7 VA and DC coils 7.0 W, and the body meets IP65 (DIN 40050).

Decide what the outlet should do with the coil off. Normally open (this model) passes supply air or vacuum to the line immediately and closes when energised; normally closed keeps the outlet vented until switched. Pick NO for default-flow duties like blow lines or held clamps, NC for fail-closed isolation. Both are ordering options on the same 3V2 body.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NOCIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NOCIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.