verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NOEIT

The AirTAC 3V2 Solenoid Valve 3V206NOEIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/8 in
  • Coil voltageAC24V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.18
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NOEIT

Specify the AirTAC 3V206NOEIT when you want the normally open 3/2 function pre-wired: the I suffix replaces the DIN socket with a flying lead-out, so the coil arrives with its cable already attached. The valve is normally open on a NPT1/8 port and runs on AC24V at 7 VA.

Inside, a spring-return direct-acting coaxial poppet gives positive sealing with Cv 0.18 and 3.2 mm2 effective area per port. The body also carries the 3V2 family vacuum rating of -102.2 kPa to 0.1 MPa, a capability the smaller 3V1 and the manifold-type 3V2M do not offer. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V206NOEIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NOEIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/8 in
ThreadNPT
Coil voltageAC24V
Electrical entryFlying lead (lead-out wire type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NOEIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NOEIT Is Used

cable

Valve wiring looms on a rotary filler

A carousel filling machine mounts many valves under a rotating deck; flying leads terminate straight into the slip-ring loom, avoiding bulky DIN connectors at each station.

view_module

Vacuum hold-down on a CNC router bed

The normally open valve keeps vacuum applied to the spoilboard while de-energised, so sheet material stays clamped through a control-power interruption.

build

Clamp circuits on a robot weld fixture

AC24V solenoids on weld fixtures hold pneumatic clamps closed through dips in control power, because the normally open state keeps air flowing to the clamp cylinders.

Is the Airtac 3V2 Solenoid Valve 3V206NOEIT the Right Part?

The flying lead saves space where there is no room to seat a DIN connector, but plan cable routing and strain relief at design stage. Compare sizes both ways: below it sit 3V1 for low-power small duties (3.0 W on DC24V) and 3V2M (Cv 0.1) for multi-station manifolds; above it sits 3V3 (1/4in, Cv 0.62, also vacuum-rated) when flow is short. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A double-acting cylinder needs the AirTAC 4V series, not this 3/2 valve.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NOEIT FAQ

3V206 (NPT1/8): effective area 3.2 mm2, Cv 0.18. 3V208 (NPT1/4): effective area 3.4 mm2, Cv 0.19. Pressure range 0-0.8 MPa, plus a negative-pressure rating of -102.2 kPa to 0.1 MPa. Temperature -20 to 70 C. Coil power 7 VA on AC, 7.0 W on DC. Ingress protection IP65 (DIN 40050). Air must be filtered to 40 um or finer.

Three ports and two states mean it either feeds one line or vents it to exhaust. That covers single-acting spring-return cylinders, air blow nozzles, pneumatic clamps, vacuum switching and piloting a larger valve. It cannot reverse a double-acting cylinder - that takes a 5-port valve such as the AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NOEIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NOEIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.