verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V206NOET

The AirTAC 3V2 Solenoid Valve 3V206NOET is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/8 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.18
  • Series3V2
$48.72 $56.22Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-06 voltage, entry and configuration on one page All 3V2-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V206NOET

The AirTAC 3V206NOET is a 3/2-way, normally open solenoid valve with a NPT1/8 port and an AC24V coil on a DIN plug connection. In the rest state it passes air from supply to outlet; energising the single solenoid shuts that path and vents the outlet to exhaust. That behaviour suits circuits where the line must stay live when power fails.

It is direct-acting with spring return and a coaxial poppet that seals on the seat for tight shutoff at useful flow: 3.2 mm2 effective area, Cv 0.18 per port. The valve is also rated for negative-pressure service from -102.2 kPa to 0.1 MPa, so one valve type can switch both pressure and vacuum circuits on the same machine. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V206NOET Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V206NOET
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/8 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.18 (3.2 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V206NOET

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/8 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V206NOET Is Used

valve

Pick-and-place vacuum cups on a packaging line

On a carton-packing vacuum gripper, the normally open valve holds vacuum on the cup while de-energised and breaks it only when the PLC energises the coil, so the grip survives an E-stop.

science

Vent line on a laboratory autoclave

Sterilisers and lab autoclaves with 24 V AC control circuits keep the vent path open at rest; the coil closes it only during the holding phase of the cycle.

factory

Pilot stage for a large process valve

A textile plant uses the normally open 3V2 to pilot a bigger air-operated process valve, keeping the pilot line supplied whenever 24 V AC control power drops.

Is the Airtac 3V2 Solenoid Valve 3V206NOET the Right Part?

This AC24V DIN-plug version fits machines with a 24 V AC control transformer. Size both ways before you commit: step down to 3V1 for small duties where low coil power matters (3.0 W on DC24V), or to 3V2M when a dense multi-station manifold matters more than flow (Cv 0.1); step up to 3V3 (1/4in, Cv 0.62, also vacuum-rated) when you need much more flow. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For a double-acting cylinder, move to the AirTAC 4V series instead.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V206NOET FAQ

Both port sizes share one body: 3V206 (NPT1/8) has 3.2 mm2 effective area, Cv 0.18; 3V208 (NPT1/4) has 3.4 mm2, Cv 0.19. Operating pressure is 0-0.8 MPa, with a vacuum rating of -102.2 kPa to 0.1 MPa. Temperature range is -20 to 70 C. Coils draw 7 VA on AC and 7.0 W on DC, and the valve meets IP65 (DIN 40050). Supply air should be filtered to 40 um or finer; lubrication is not required.

Choose NO when the outlet must pass air while the coil is off and vent only when energised - for example a blow line, clamp or vacuum circuit that must stay live through a power failure. If your circuit needs air only when energised, order the NC code instead: same body, different state letter.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V206NOET

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V206NOET and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.