verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NCBT

The AirTAC 3V2 Solenoid Valve 3V208NCBT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageDC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.19
  • Series3V2
$48.60 $56.10Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NCBT

3V208NCBT is the DC24V member of the 3V2 family: a 3/2-way, direct-acting, single-solenoid valve with spring return and a coaxial poppet that seats cleanly for tight shutoff. Normally closed, it keeps the 1/4in outlet vented until the 7.0 W coil is energised from a 24 V supply - the same bus that powers most PLC and relay outputs, so no separate control transformer is needed.

Each port offers 3.4 mm2 effective area (Cv 0.19). The valve also switches vacuum circuits, rated -102.2 kPa to 0.1 MPa, something the 3V1 and 3V2M bodies cannot claim. IP65 (DIN 40050) protection and a manual override round out the package; source is genuine AirTAC. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac 3V2 Solenoid Valve 3V208NCBT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NCBT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageDC24V
Electrical entryDIN plug (DIN socket type)
Coil power7.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NCBT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NCBT Is Used

settings_input_component

PLC-driven leak-test bench

A 24 V DC output card energises the valve directly to pressurise a leak-test fixture; dropping the output vents the part, and the manual override helps fixture setup.

view_module

Solar laminate glass handling

Switches vacuum to suction cups lifting glass-faced laminates; the -102.2 kPa rating suits negative-pressure lines, with 24 V control shared straight from the machine PLC.

build

Electronics jig pin clamp

Extends a spring-return pin clamp on an assembly jig; on power loss the valve vents and the jig releases, so operators can always free the workpiece by hand.

Is the Airtac 3V2 Solenoid Valve 3V208NCBT the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. On 24 V control, remember the 3V1 DC coil runs at 3.0 W versus 7.0 W here if panel heat or power budget is tight.

Flow-wise, 3V208 sits at Cv 0.19 against 0.18 for the 1/8in 3V206, so a genuine jump in flow means moving to 3V3 (Cv 0.62, also vacuum-rated). Prefer manifold density over individual ports? The 3V2M gives Cv 0.1 per station. Double-acting cylinder in the spec? That is a 5-port job - route it to the AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NCBT FAQ

Per-port effective area is 3.4 mm2 and Cv is 0.19 on this 1/4in body (the 1/8in 3V206 is 3.2 mm2 / Cv 0.18). Operating pressure is 0-0.8 MPa; the vacuum rating is -102.2 kPa to 0.1 MPa. Temperature spans -20 to 70 C. Coil power is 7 VA on AC and 7.0 W on DC versions, with IP65 (DIN 40050) protection.

Yes - unlike 3V1 and 3V2M, the 3V2 body is rated for negative-pressure service from -102.2 kPa to 0.1 MPa, so it switches vacuum lines as well as the standard 0-0.8 MPa compressed-air range. No vacuum flow rate or pump-down time is published; confirm those from the datasheet or ask via RFQ before sizing the circuit.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NCBT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NCBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.