verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NCCIT

The AirTAC 3V2 Solenoid Valve 3V208NCCIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageAC110V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.19
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NCCIT

Wired with a pre-formed lead-out wire rather than a DIN socket, the 3V208NCCIT suits control schemes where the coil terminates directly to a terminal strip or machine harness. It is a normally closed 3/2 valve on 1/4in NPT ports: de-energised it blocks the outlet and vents it, energised at AC110V it passes supply air to the line.

The single solenoid is spring-return and direct-acting, so it shifts with no differential pressure and seats through a coaxial poppet for clean shut-off. Flow per port is Cv 0.19 (3.4 mm2 effective area) at working pressures up to 0.8 MPa, and the assembly is IP65 (DIN 40050) against dust and spray.

Airtac 3V2 Solenoid Valve 3V208NCCIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NCCIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageAC110V
Electrical entryFlying lead (lead-out wire type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NCCIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
AC110VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NCCIT Is Used

precision_manufacturing

Pick-and-place head on a packaging line

Flying-lead wiring runs straight to the robot harness; the valve switches vacuum at up to -102.2 kPa for suction cups lifting cartons and blisters.

air

Blow-off after ultrasonic parts washing

Normally closed so no air leaks between cycles; energising at AC110V opens the 1/4in port (Cv 0.19) to dry machined parts before inspection.

factory

Air signal to a shuttle gate on a bottling conveyor

NC means the gate cylinder stays vented during a stoppage, and the pre-wired lead-out simplifies installation away from the control panel.

Is the Airtac 3V2 Solenoid Valve 3V208NCCIT the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For very light duties the 3V1 sips just 3.0 W on DC24V; for dense multi-station manifolds the 3V2M trades flow (Cv 0.1) for packing density. If you need substantially more air, the 3V3 lifts flow to Cv 0.62 on the same 1/4in size.

Double-acting cylinders need the 5-port AirTAC 4V series, not this valve.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NCCIT FAQ

1/4in NPT ports; effective area 3.4 mm2 and Cv 0.19 per port (3V206 = 3.2 mm2 / Cv 0.18). Pressure range 0-0.8 MPa, plus vacuum service rated -102.2 kPa to 0.1 MPa. Media temperature -20 to 70 C. AC coils draw 7 VA (DC coils 7.0 W); this version is AC110V with a flying-lead entry and IP65 (DIN 40050) protection.

The I suffix means the coil is supplied with a lead-out wire rather than a socket for a separate DIN connector. That suits direct wiring to terminal strips, junction boxes or machine harnesses and removes one connector to seal. Function is unchanged: NC initial state, spring return, coaxial poppet, vacuum rated to -102.2 kPa.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NCCIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NCCIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.