verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NCET

The AirTAC 3V2 Solenoid Valve 3V208NCET is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.19
  • Series3V2
$48.60 $56.10Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NCET

At AC24V the 3V208NCET runs on the low control voltage many machine builders prefer for operator safety and standard safety-circuit outputs. It is a 3/2, normally closed valve with 1/4in NPT ports: until the coil is powered the outlet is closed and vented, then it opens to feed the downstream line.

Direct-acting spring return with a coaxial shut-off poppet means no pilot air is needed to shift it. Each port passes Cv 0.19 (3.4 mm2 effective area). This body is also rated for vacuum service down to -102.2 kPa, unlike the smaller 3V1, so vacuum cups and pressure circuits can share the same valve type on one machine.

Airtac 3V2 Solenoid Valve 3V208NCET Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NCET
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NCET

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NCET Is Used

build

Woodworking clamp actuation

The spring-return NC valve vents the clamp line whenever power is lost on the AC24V control circuit, a safe default around saws and presses.

science

Vacuum hold-down on a lab sample table

Rated to -102.2 kPa, it switches the negative-pressure line holding samples or masks, sharing a valve type with the pneumatic tooling beside it.

conveyor_belt

Stopper cylinder at a pallet conveyor junction

AC24V ties into machine safety circuits; energise to raise the stopper, and the exhaust port dumps the single-acting cylinder when released.

Is the Airtac 3V2 Solenoid Valve 3V208NCET the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Down-sizing: pick 3V1 where only tiny flow and the lowest coil draw (3.0 W on DC24V) matter, or 3V2M when a manifold of closely packed stations beats the Cv 0.19 you get here. Up-sizing: the 3V3 delivers Cv 0.62 on 1/4in and still handles vacuum.

For double-acting cylinder control, move to the AirTAC 4V family.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NCET FAQ

1/4in NPT port, 3.4 mm2 effective area and Cv 0.19 per port (the 1/8in 3V206 is 3.2 mm2 / Cv 0.18). Working pressure 0-0.8 MPa with a vacuum rating of -102.2 kPa to 0.1 MPa. Operating temperature -20 to 70 C. Coil power is 7 VA on AC (this model) and 7.0 W on DC. Enclosure protection IP65 (DIN 40050).

With the AC24V coil de-energised the outlet is blocked from supply and connected to exhaust, so the downstream single-acting cylinder or blow nozzle is deliberately vented at rest. Air only reaches the outlet while the coil is powered. Choose the NO variant instead if the line must pass air until the valve is told to stop it.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NCET

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NCET and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.