verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NCFIT

The AirTAC 3V2 Solenoid Valve 3V208NCFIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageDC12V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.19
  • Series3V2
$48.60 $56.10Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NCFIT

With the I suffix, 3V208NCFIT arrives with a pre-wired lead-out instead of a DIN socket, so the coil connects by flying lead - no separate plug to buy or seat. The valve is a normally closed, direct-acting 3/2 poppet unit on a 1/4in NPT port: three ports, two states, feeding the outlet only while the coil is energised and venting it the moment the spring resets.

The DC12V coil draws 7.0 W and the coaxial shut-off poppet keeps a tight seat across the 0-0.8 MPa range; this body is also rated for negative pressure down to -102.2 kPa, a capability the 3V1 and 3V2M families do not have. Per-port flow is Cv 0.19, or 3.4 mm2 effective area.

Airtac 3V2 Solenoid Valve 3V208NCFIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NCFIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageDC12V
Electrical entryFlying lead (lead-out wire type)
Coil power7.0 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NCFIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NCFIT Is Used

bolt

Pneumatic swing clamp on a welding fixture

Energise to push the clamp; cut power and the NC valve exhausts the cylinder so its spring opens it - a fail-safe posture at the weld station.

factory

Bagging machine interlock

The lead-out wires straight into the panel harness, gating air to a single-acting pusher that kicks misaligned pouches off the conveyor.

engineering

Pilot stage on a process skid

Use the valve to pressurise and dump the pilot port of a larger air-operated process valve, keeping the main actuator solenoid out of the hazardous area.

Is the Airtac 3V2 Solenoid Valve 3V208NCFIT the Right Part?

Step down when you can: 3V1 fits light duties where coil power dominates (3.0 W on its DC24V coil against 7.0 W here), and 3V2M suits a compact manifold build where shared-base flow of Cv 0.1 is enough. For real extra flow, 3V3 offers Cv 0.62 on 1/4in and keeps the vacuum rating. Order by five decisions: 1/8in or 1/4in port (NPT on this code), NC or NO start state, coil voltage, DIN plug versus flying lead, and any vacuum in the duty. Double-acting cylinders are a job for the 5-port AirTAC 4V range instead.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NCFIT FAQ

Effective area and Cv: 3.4 mm2 and 0.19 for this 1/4in body, 3.2 mm2 and 0.18 for the 1/8in version. Operating pressure 0-0.8 MPa; vacuum duty -102.2 kPa to 0.1 MPa. Temperature -20 to 70 C. Coil: 7 VA on AC, 7.0 W on DC. Ingress protection IP65 (DIN 40050).

The I suffix supplies the coil already wired with a lead-out, useful where a plug-in connector could loosen under vibration or where the coil is wired into a loom during build. Function, flow (Cv 0.19 on this 1/4in port) and pressure rating are otherwise the same. Confirm lead length and termination from the datasheet before ordering.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NCFIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NCFIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.