verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NOEIT

The AirTAC 3V2 Solenoid Valve 3V208NOEIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/4 in
  • Coil voltageAC24V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.19
  • Series3V2
$43.98 $51.48Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NOEIT

What separates the 3V208NOEIT from its DIN-plug sibling is the electrical entry: the AC24V coil ends in a factory-fitted flying lead, so the installer crimps or lands the wires directly instead of seating a plug connector. In cramped cabinets or behind guards that saves real commissioning time.

Functionally it is a normally open, direct-acting 3/2 valve on 1/4in NPT ports: air flows while the coil is off, and energising the single solenoid closes the path against the spring return. Flow per port is Cv 0.19 / 3.4 mm2 effective area, and the coaxial poppet keeps the seal tight across the full 0-0.8 MPa range as well as in vacuum service down to -102.2 kPa. Genuine AirTAC construction throughout; full option codes are on the datasheet.

Airtac 3V2 Solenoid Valve 3V208NOEIT Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NOEIT
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/4 in
ThreadNPT
Coil voltageAC24V
Electrical entryFlying lead (lead-out wire type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NOEIT

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NOEIT Is Used

precision_manufacturing

CNC router sheet hold-down

A normally open valve keeps vacuum reaching the hold-down cups on a wood-router table by default and only breaks the circuit when the controller commands it - the AC24V flying lead lands directly in the machine's junction box.

factory

Fail-extended clamp on a crate stacker

On a bottling-hall crate stacker the single-acting clamp arm stays extended (fed) while power is off; energising the coil vents the cylinder and the spring retracts it for safe access.

cable

Washdown-zone wiring

In a dairy washdown cell the pre-wired lead-out runs through conduit to a sealed junction box away from spray, avoiding an exposed DIN socket on the valve body.

Is the Airtac 3V2 Solenoid Valve 3V208NOEIT the Right Part?

Confirm five points at order time: 1/4in port (NPT on this code), normally open state, AC24V voltage, flying-lead entry, vacuum duty or not. Sizing alternatives: for a small, low-power task the 3V1 draws 3.0 W on DC24V versus 7.0 W here; for dense multi-station manifolds the 3V2M trades flow for footprint (Cv 0.1, roughly half of what an individually ported 3V2 passes); for substantially more flow choose the 3V3 at Cv 0.62, which is vacuum rated too. Double-acting cylinders are a job for the 5-port AirTAC 4V range, not this valve.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NOEIT FAQ

Yes. Per-port flow is Cv 0.19 with a 3.4 mm2 effective area on this 1/4in body (the 1/8in 3V206 is Cv 0.18 / 3.2 mm2). It operates from 0 to 0.8 MPa and is also rated for vacuum, -102.2 kPa to 0.1 MPa. Temperature limits are -20 to 70 C, the AC coil takes 7 VA and the DC coil 7.0 W, sealing is to IP65 (DIN 40050), and filtered air of 40 um or better is required.

It is. The 3V2 body carries a negative-pressure rating of -102.2 kPa to 0.1 MPa, so it can open, close or vent vacuum circuits such as suction cups and hold-down tables. That rating belongs to the 3V2 - the 3V1 and 3V2M bodies are not vacuum capable. Exact vacuum flow depends on your pump and plumbing; check the datasheet or send an RFQ.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NOEIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NOEIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.