verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V2 · 3/2-Way Solenoid Valve

Airtac 3V2 Solenoid Valve 3V208NOET

The AirTAC 3V2 Solenoid Valve 3V208NOET is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally open
  • Port size1/4 in
  • Coil voltageAC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.19
  • Series3V2
$48.72 $56.22Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V2-08 voltage, entry and configuration on one page All 3V2-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V2 Solenoid Valve 3V208NOET

The AirTAC 3V208NOET is the normally open, 1/4in NPT member of the 3V2 family. It has three ports and two states: unpowered, supply passes through to the outlet; energised, the valve shuts that path and vents the outlet to exhaust. That fail-open logic suits lines where a lost signal must stop feeding a single-acting cylinder, a clamp or a blow jet rather than trap it under pressure.

A spring return and coaxial poppet do the switching, so the valve is fully direct acting and needs no minimum pressure to operate. Each port offers Cv 0.19 (3.4 mm2 effective area). The AC24V coil takes 7 VA through a DIN plug, protection is IP65, and - unlike the 3V1 or 3V2M bodies - this valve is rated for vacuum down to -102.2 kPa.

Airtac 3V2 Solenoid Valve 3V208NOET Technical Specifications

ModelAirtac 3V2 Solenoid Valve 3V208NOET
Series3V2
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally open
Port size1/4 in
ThreadNPT
Coil voltageAC24V
Electrical entryDIN plug (DIN socket type)
Coil power7 VA
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.19 (3.4 mm2 effective area)
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V2 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V2 Solenoid Valve 3V208NOET

3V2Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NONormally open: air passes until the coil is energised.
AC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V2 Solenoid Valve 3V208NOET Is Used

air

Carton-line blow-off

On a food packaging carton sealer, the normally open state keeps the dust-clearing jet running while the machine is powered down or e-stopped; energising the AC24V coil through the DIN plug cuts the jet instantly.

science

Microplate vacuum handling

A laboratory plate handler uses the 3V208NOET to switch suction on a microplate gripper; the -102.2 kPa vacuum rating lets one valve manage both the vacuum draw and the venting of the cup.

valve

Pilot for a process diaphragm valve

Mounted in a water-treatment skid, the valve passes a pilot air signal to a larger diaphragm valve while unpowered and dumps the signal to exhaust when energised, giving a fail-open control scheme.

Is the Airtac 3V2 Solenoid Valve 3V208NOET the Right Part?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If the duty is light and coil draw is the constraint, the 3V1 takes 3.0 W on DC24V against 7.0 W here; if you need many valves packed close, the base-mounted 3V2M wins on density but not on flow, since its Cv is only 0.1; and when the job genuinely needs more capacity, 3V3 at Cv 0.62 is the step up and is also vacuum rated. A double-acting cylinder requires a 5-port valve - specify the AirTAC 4V series.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V2 Solenoid Valve 3V208NOET FAQ

The 1/4in body flows Cv 0.19 per port (3.4 mm2 effective area); the 1/8in 3V206 variant flows Cv 0.18 (3.2 mm2). Pressure range is 0-0.8 MPa, extended to -102.2 kPa for vacuum service. Temperature spans -20 to 70 C. Coils draw 7 VA on AC and 7.0 W on DC, protection class is IP65 (DIN 40050), and the air must be filtered to 40 um or finer.

Pick NO when the line should flow while the coil is off: a blow-off that must keep running through a control failure, a vent that must open on power loss, or a single-acting cylinder that should stay fed by default. NC does the reverse and blocks the outlet until energised. Both states are catalogue options on the same 3V2 body.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V2 Solenoid Valve 3V208NOET

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V208NOET and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.