verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V3 · 3/2-Way Solenoid Valve

Airtac 3V3 Solenoid Valve 3V308NCBT

The AirTAC 3V3 Solenoid Valve 3V308NCBT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageDC24V
  • Electrical entryDIN plug (DIN socket type)
  • Flow (Cv)0.62
  • Series3V3
$70.69 $78.19Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V3-08 voltage, entry and configuration on one page All 3V3-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V3 Solenoid Valve 3V308NCBT

The 3V308NCBT pairs a DC24V coil with the biggest flow in AirTAC's 3V3 body: a normally closed, direct-acting 3/2 coaxial poppet valve on a 1/4in NPT port that switches one line between supply and exhaust. With the coil off, the outlet is shut and the downstream side is held.

It is also a vacuum-capable choice: the body carries a -102.2 kPa to 0.1 MPa rating, so it can sit on negative-pressure lines for cup lifting or evacuation duty - a rating the smaller 3V1 does not share. The DC24V coil draws 6.5 W, and Cv 0.62 keeps restriction low on larger single-acting circuits.

Airtac 3V3 Solenoid Valve 3V308NCBT Technical Specifications

ModelAirtac 3V3 Solenoid Valve 3V308NCBT
Series3V3
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageDC24V
Electrical entryDIN plug (DIN socket type)
Coil power6.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.62
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V3 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V3 Solenoid Valve 3V308NCBT

3V3Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC24VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
—Electrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V3 Solenoid Valve 3V308NCBT Is Used

conveyor_belt

Stopper cylinder on a conveyor transfer line

Raises and lowers a spring-return stopper from a 24 V PLC output; the NC state drops the stopper whenever the controller output goes low.

science

Vacuum cup gripping on a case erector

Holds and releases carton blanks through vacuum cups, with the body rated for negative pressure down to -102.2 kPa.

valve

Pilot control of a large diaphragm process valve

Switches the pilot air of a bigger valve from a 24 V control panel, venting the pilot line to exhaust when the coil is de-energised.

Is the Airtac 3V3 Solenoid Valve 3V308NCBT the Right Part?

Because 3V3 is the largest 3-port body, the only sizing direction is downward: 3V2 if Cv 0.18-0.19 is enough (it is vacuum-rated as well), 3V2M at Cv 0.1 when manifold density matters more than flow, or 3V1 for minimal low-power duties. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Double-acting cylinders need the 5-port 4V series instead.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V3 Solenoid Valve 3V308NCBT FAQ

Direct-acting 3/2 poppet with spring return: Cv 0.62, pressure 0-0.8 MPa, vacuum rating -102.2 kPa to 0.1 MPa, temperature -20 to 70 C, DC24V coil at 6.5 W (AC coils in the family take 10 VA), IP65 housing, 40 um filtration, manual override included.

Three ports mean it either feeds or vents one line: ideal for single-acting spring-return cylinders, clamps, air blow, vacuum switching and piloting larger valves. A double-acting cylinder needs simultaneous feed and return paths, so specify a 5-port AirTAC 4V valve instead.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V3 Solenoid Valve 3V308NCBT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V308NCBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.