verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 3V3 · 3/2-Way Solenoid Valve

Airtac 3V3 Solenoid Valve 3V308NCFIT

The AirTAC 3V3 Solenoid Valve 3V308NCFIT is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.

  • Valve type3/2-way (3-port, 2-position)
  • Initial stateNormally closed
  • Port size1/4 in
  • Coil voltageDC12V
  • Electrical entryFlying lead (lead-out wire type)
  • Flow (Cv)0.62
  • Series3V3
$65.76 $73.26Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 3V3-08 voltage, entry and configuration on one page All 3V3-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 3V3 Solenoid Valve 3V308NCFIT

Code 3V308NCFIT spells out a specific wiring choice: the normally closed, 1/4 inch, NPT-threaded 3/2 valve with its AC24V coil terminated in a flying lead rather than a DIN socket. Panels that gland wires straight onto terminals can connect without sourcing an extra plug.

Functionally it is the direct-acting, spring-return poppet body: Cv 0.62 of flow headroom - about six times a manifold-mounted 3V2M - plus IP65 sealing and vacuum capability to -102.2 kPa. With the coil off the outlet sits on exhaust; energising opens supply to the line.

Airtac 3V3 Solenoid Valve 3V308NCFIT Technical Specifications

ModelAirtac 3V3 Solenoid Valve 3V308NCFIT
Series3V3
Valve type3/2-way (3-port, 2-position)
FunctionDirect-acting, single solenoid, spring return
Initial stateNormally closed
Port size1/4 in
ThreadNPT
Coil voltageDC12V
Electrical entryFlying lead (lead-out wire type)
Coil power6.5 W
Operating pressure0-0.8 MPa (0-114 psi)
Vacuum serviceRated -102.2 kPa to 0.1 MPa
Flow coefficientCv 0.62
Temperature-20 to 70 C
ConstructionCoaxial shut-off (poppet), direct-acting, spring return
ProtectionIP65 (DIN 40050)
MediumAir, filtered by a 40 µm or finer element. Lubrication not required.

Figures follow the official AirTAC 3V3 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Model Code: Airtac 3V3 Solenoid Valve 3V308NCFIT

3V3Body — sets the flow, the coil power and whether vacuum is rated.
1/4 inPort size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in.
NCNormally closed: no air at the outlet until the coil is energised.
DC12VCoil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V.
IElectrical entry: I = flying lead, otherwise a DIN plug.
NPTPort thread. PT is standard; G and NPT are available to order.

What a 3/2 Valve Does

A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.

That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.

It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.

Where the Airtac 3V3 Solenoid Valve 3V308NCFIT Is Used

handyman

Field retrofit wiring

On a retrofit job the pre-wired lead-out splices straight into an AC24V control loom, so no DIN socket or plug has to be hunted down separately.

speed

Sorting-chute kicker

The moment the coil de-energises, a small single-acting kicker cylinder vents and snaps back, flicking a mis-sized pack off a high-rate sorting chute.

settings_input_component

Clamp manifold branch

One 1/4 inch branch feeding a power clamp on a weld-cell fixture, where Cv 0.62 keeps fill time short even on long air lines.

Is the Airtac 3V3 Solenoid Valve 3V308NCFIT the Right Part?

Nothing in the 3V family out-flows the 3V3, so the sizing question is always downward. Step to 3V2 (Cv 0.18-0.19, still vacuum capable) for lighter 1/8 inch duties, to 3V2M (Cv 0.1) where packing many stations onto one manifold beats raw flow, or to 3V1 when the lowest coil draw wins - 3.0 W at DC24V. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For a double-acting cylinder, switch to the 5-port AirTAC 4V range.

Confirm before you order

  • ✓ Port size and thread (PT standard; G / NPT to order)
  • ✓ Initial state — NC or NO, ordered up front
  • ✓ Coil voltage matches your controller output
  • ✓ Electrical entry — DIN plug or flying lead
  • ✓ Single valve, bare base, or complete assembly
  • ✓ Single-acting duty, not double-acting
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
  • check Match the coil voltage to your controller output.
  • check Use the manual override to test before powering up.
  • check Leave the exhaust port clear, or fit a silencer.
  • check Wiring by qualified personnel, per AirTAC documentation.

Airtac 3V3 Solenoid Valve 3V308NCFIT FAQ

Cv 0.62 flow coefficient; 0-0.8 MPa working pressure (0-114 psi); rated from -102.2 kPa to 0.1 MPa for vacuum service; usable from -20 to 70 C; 10 VA coil draw on AC versions, 6.5 W on DC; IP65 to DIN 40050. Air supply should be filtered to 40 um or better, with no lubrication needed.

It has three ports - supply, outlet, exhaust - and two states, so it either feeds or vents one line. That covers single-acting spring-return cylinders, blow nozzles, clamps, vacuum switching and piloting a larger valve. It cannot drive a double-acting cylinder; that needs five ports, i.e. the AirTAC 4V series.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by the AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 3V3 Solenoid Valve 3V308NCFIT

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 3V308NCFIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.