
The AirTAC 4V100 Solenoid Valve 4V120-06-CT is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-06CT is a 5/2-way double-solenoid valve built on the compact 4V100 body, using a 1/8-inch NPT threaded port. It directs compressed air to double-acting cylinders and actuators with a memory function: a brief pulse to either coil shifts the spool, and the valve mechanically holds that last position even if power is removed—no spring, no holding current.
This AC110V terminal-box configuration draws 3.5 VA and delivers an effective area of 10.2 mm² (Cv 0.6), suiting cylinders in the ~Ø16-32 mm range for light automation. The spool responds in 0.05 s or less, and the IP65-rated aluminum body weighs 175 g, ready for manifold mounting or standalone use.
| Model | Airtac 4V100 Solenoid Valve 4V120-06-CT |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
A short AC110V pulse shifts the 4V120-06CT to clamp a small part in a benchtop fixture. The memory hold keeps clamping force steady without coil heating, then a reverse pulse releases.
Operates a small divert gate on a packaging line. The double-solenoid memory ensures the gate stays in its last commanded position through E-stops or power cycles, preventing mis-sorts.
Drives a Ø20 mm double-acting cylinder in a fluid-handling robot. The 0.05 s response and 5 cycles/sec max frequency deliver crisp, repeatable motion for pipetting or vial transfer.
Choose the 4V120-06CT when you need a 5/2 valve that stays put after a signal—ideal for sequences where holding a cylinder position without constant power saves energy or simplifies control. If your cylinder is larger than Ø32 mm or you need faster cycling, step up to the 4V200 series (Cv 1.0).
For replacement, match five points exactly: 4V100 body size, double-solenoid (memory) function, 1/8-inch port with NPT thread, AC110V coil voltage, and terminal-box electrical entry. This valve also accepts the 4V100-series manifold base, letting you gang multiple stations with a common supply and exhaust.
Quick checklist
With a Cv of 0.6 and 10.2 mm² effective area, it suits double-acting cylinders roughly Ø16-32 mm in typical light-automation cycles. For larger bores or faster stroking, the 4V200 series (Cv 1.0) is a better match.
The spool stays in its last pulsed position by land friction and balanced pressure—no spring, no magnetism, no holding current. It is not a safety brake. For suspended or vertical loads, add a pilot-operated check valve at the cylinder ports or a mechanical lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.