
The AirTAC 4V100 Solenoid Valve 4V120-06-FT is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-06FT is a 5/2-way double solenoid valve that directs compressed air to double-acting cylinders and actuators, using a memory spool design. Once pulsed, the spool stays in its last commanded position even if power is removed—held by land friction and balanced pressure, not by magnets or holding current. This makes it ideal for applications where the valve state must survive a control power cycle.
Built on the compact 4V100 body with 1/8-inch NPT ports, it provides an effective area of 10.2 mm² (Cv 0.6) and cycles up to 5 times per second. The DC12V coil draws just 2.5 W, and the aluminum-alloy body weighs 175 g. Response time is 0.05 seconds or less, with IP65 protection and a manual override for setup.
| Model | Airtac 4V100 Solenoid Valve 4V120-06-FT |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The 2.5 W DC12V coil and memory function suit mobile or battery-operated systems where holding a position without draining power is critical.
Controls a double-acting gripper or mini slide; the memory spool keeps the part held if an E-stop interrupts the control signal.
Fits compact pneumatic test fixtures cycling small cylinders. The manual override speeds up debugging during prototype development.
Choose the 4V120-06FT when your double-acting cylinder is in the ~O16-32 mm bore range and you need the valve to remember its last position without continuous power. If your cylinder is larger or requires faster fill rates, step up to the 4V200 series, which offers a Cv of 1.0. For a spring-return action that defaults to a known state on power loss, the single-solenoid 4V110 is the correct alternative.
When replacing an existing valve, match all five points: the 4V100 body size, the double-solenoid 5/2 memory function, 1/8-inch NPT thread, DC12V coil voltage, and terminal-box electrical entry. The valve can be mounted individually or on a shared manifold base for multi-valve assemblies.
Quick checklist
With a Cv of 0.6 and 10.2 mm² effective area, it pairs well with double-acting cylinders in the ~O16 to 32 mm bore range for typical automation speeds. For larger bores or very high cycle rates, consider the 4V200 series.
The spool stays in the position it was last pulsed to, held by friction and balanced air pressure. No spring forces it back, and no holding current is needed. It is not magnetically latched—simply a mechanical memory that survives a power loss.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.