
The AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08-X0) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
This is the 4V230E-08-X0: the coil-less bare body version of AirTAC's 5/3-way double-solenoid valve with exhaust center. It arrives without a solenoid coil and without the electrical connector, so it is ordered when you already have a compatible coil at your plant voltage or when building an OEM panel - the coil is simply purchased separately. Pneumatically it is the standard 4V230E: pulsing either solenoid shifts the spool, and at de-energised center both cylinder ports A and B vent to exhaust while supply is blocked, letting a double-acting cylinder float free so it can be positioned by hand or drift under low external force.
As a 5/3 valve in the 4V200 body it carries an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling rate of 3 cycles per second, with actuating response of 0.05 s or better. The 1/4in PT (Rc tapered) ports suit O32-50 mm bores as a sizing guide, and the aluminum-alloy body weighs 360 g. Operating pressure runs 0.15-0.8 MPa with IP65 protection once the coil and connector are fitted.
| Model | AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08-X0) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Feeds double-acting clamp and press fixtures where operators want the slide free to nudge at center, with Cv 0.8 (catalog figure for the 4V230C-08) flow sized for O32-50 mm bores.
Exhaust-center behavior vents both cylinder sides between strokes, so gripper arms can be repositioned manually during changeover on packaging lines.
A bare 360 g body that bolts onto existing 4V200 manifolds, letting panel builders reuse tested coils instead of buying complete valves.
Match your Cv first: drop to the 4V100 (Cv 0.6) for compact bores, stay on this 4V200 body for mid-range O32-50 mm cylinders, and step up to the 4V300 (Cv 1.65) when a larger bore or faster stroke needs more flow. Choose this 5/3 exhaust-center model when the actuator should move freely at center; pick the 30C variant to hold position or the 30P to keep both sides pressurised. Single-base valves suit isolated duties, while a manifold base groups several bodies onto one supply.
Because -X0 ships bare, your 5-point replacement check is: body size 4V200, function 30E, port 1/4in PT thread, and then order the coil and connector at your own voltage (AC220V, AC110V, AC24V, DC24V or DC12V are available in this series) with either terminal or grommet entry. Confirm the old body starts with 4V2 before swapping.
AirtacDistr lists every 4V230E-08 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230e-08-solenoid-valve
Quick checklist
No. The -X0 suffix marks the bare valve body: it ships with the spool, springs, ports and coil-retaining nut, but without any coil or electrical connector. Order the coil at your required voltage (AC220V, AC110V, AC24V, DC24V or DC12V) plus the connector separately, then the valve behaves exactly like a standard 4V230E-08 with Cv 0.8 (catalog figure for the 4V230C-08) flow and a 0.05 s response.
When both solenoids are off, the spool blocks the supply and vents cylinder ports A and B to exhaust, so a double-acting cylinder is unpressurised and can be moved by hand or drift with the load. It is a convenience position, not a brake: for suspended or hazardous loads add a mechanical brake or pilot-operated check valves at the cylinder ports. Also note the 5/3 flow class is 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a 3 cycle-per-second limit, slightly below the 5/2 versions of this body.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.