
The AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08C-W) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230E08C-W is a 5/3-way double solenoid valve from the AirTAC 4V200 series, fitted with 1/4" PT tapered ports and an AC110V coil rated at 4.5 VA on a standard terminal-box entry. Its exhaust center lets both cylinder ports vent while the spool sits at mid-position, so an attached double-acting cylinder drifts freely and can be moved by hand or by an external force - ideal where a slide or gripper must not fight the valve between cycles. The -W suffix marks the external-pilot version: pilot air is supplied through a dedicated port rather than tapped from the main line, so switching stays dependable on low-pressure or vacuum circuits. Like every 4V200 model it responds in 0.05 s or less and carries IP65 protection.
This 5/3 body flows 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a maximum cycling rate of 3 cycles per second, and the unit weighs 360 g. That places it squarely in the mid-body class for double-acting cylinders of roughly O32-50 mm bore. Supply air must pass a 40 um filter, operating pressure spans 0.15-0.8 MPa with 1.2 MPa proof pressure, and the aluminum body works from -20 to +70 C with no lubrication required. The valve mounts singly or snaps onto a base to form an integrated manifold group.
| Model | AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08C-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Cycles double-acting pusher cylinders that deflect cartons or products on a line. With the exhaust center, the pusher can be nudged aside by hand during changeover instead of being locked against the spool.
Directs air to O32-50 mm double-acting actuators on rotary tables and pick stations. At Cv 0.8 (catalog figure for the 4V230C-08) and a 3 cycle/s rating it keeps pace with steady mid-speed indexing work.
The external-pilot feed lets the spool switch even when the main line runs at low pressure, making this version a fit for leak-test fixtures and vacuum-assisted clamping circuits.
Size by cylinder bore and cycle speed: drop to the 4V100 (Cv 0.6) for small bores, and step up to the 4V300 (Cv 1.65) when a larger bore or a faster stroke needs more flow. Within the 4V200 range, choose this 4V230E08C-W when you need both cylinder ports to vent at center - pick the 30C closed center to hold position instead, the 30P pressure center to keep both sides live, a 4V220 for a memory function without center dwell, or a 4V210 for a simple spring-return signal. A single valve suits one-off stations; a base-mounted manifold arrangement tidies up multi-valve panels.
When ordering a replacement, match five things exactly: body size (4V200), function code (30E for this exhaust center), port and thread (1/4" PT here), coil voltage (AC110V), and electrical entry (terminal box). Also confirm the -W external pilot, because a standard internally-piloted 4V230E-08C will not behave the same on a low-pressure main - the external pilot port must be plumbed to its own supply.
Quick checklist
It switches double-acting cylinders and actuators of about O32-50 mm bore, flowing 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a maximum of 3 cycles per second. The -W option means the pilot is fed externally: instead of tapping pilot air from the main supply, you connect a separate pilot port, so the valve still shifts reliably when main-line pressure is low or in vacuum and low-pressure circuits. Factor that extra pilot line into your plumbing plan.
At center, both cylinder ports open to exhaust, so the piston rods float free - the load can drift, and neither side is blocked. That is useful for manual jog or freeing a slide, but it is not a way to hold a suspended or fall-hazard load. For guaranteed holding, add a mechanical brake or pilot-operated check valves at the cylinder ports; the valve alone does not provide that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.