verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT)

The AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/4 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/4
  • Effective area21.3 mm²
  • Flow (Cv)1.25
  • Series4V300
$75.24 $82.74Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V330C-08 stroke, mounting and version on one page All 4V330C-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT)

The 4V330C-08BIT is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators, with a closed center that blocks all ports when the spool is at rest. In this mid-position, both cylinder ports are sealed, so the actuator is held firmly in place—ideal for stopping a load at an intermediate point without drifting. This specific configuration ships with a DC24V coil drawing just 3.0 W and a pre-wired grommet entry with a 0.5 m flying lead, simplifying electrical hookup on DIN-rail panels.

Built on the 4V300 aluminum-alloy body, it provides an effective area of 21.3 mm² (Cv 1.25) and suits ~Ø50–80 mm double-acting cylinders. The spool shifts in 0.05 s or less, and the IP65 enclosure with class-B insulation keeps it reliable in dusty or washdown environments. The closed-center design means you can pause a press or clamp mid-cycle without needing a separate holding circuit. This version has NPT ports (the T in the order code) for North American pipe fittings.

AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT) Technical Specifications

ModelAirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT)
Series4V300 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/4
Exhaust portPT1/4
Effective area (Cv)21.3 mm² (Cv 1.25)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight450 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area21.3 mm²
Flow coefficientCv 1.25
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT)

4VSolenoid valve, spool type, 4-series.
3Body size (4V300) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-08Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT) Is Used

precision_manufacturing

Mid-Stroke Clamping

A fixture clamp needs to stop and hold a part at a precise intermediate position for a secondary operation. The 4V330C-08BIT’s closed center blocks both cylinder ports, locking the clamp in place without air consumption or drift.

conveyor_belt

Vertical Lift Pause

On a vertical material lift, the load must pause halfway for an inspection step. The closed-center spool holds the cylinder piston securely at mid-stroke, preventing the load from sagging while the operator checks the part.

settings_input_component

Pneumatic Press Control

A small assembly press uses a Ø63 mm cylinder to insert components. The 5/3 closed-center valve stops the ram at a set depth, holding pressure off the part while a sensor confirms insertion force before the cycle completes.

Is the AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT) the Right Valve?

Choose the 4V330C-08BIT when your application requires a mid-stroke hold on a double-acting cylinder and you are wiring with a DC24V supply. The closed center blocks all flow at neutral, so the cylinder stays put—unlike the exhaust-center 4V330E variant that lets the cylinder float. If you are driving a smaller Ø32–40 mm cylinder, the 4V200 series (Cv 1.0) may be a better match; for bores above Ø100 mm, step up to the 4V400 body (Cv 2.82).

For a direct replacement, match five points: 4V300 body size, 5/3 closed-center function (30C), 1/4-inch port with NPT thread, DC24V coil, and grommet electrical entry. This model can be mounted on a manifold base to build a compact valve terminal—just confirm your sub-base matches the 1/4-inch NPT port pattern.

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT) FAQ

With an effective area of 21.3 mm² (Cv 1.25), it is sized for double-acting cylinders in the ~Ø50–80 mm range. It delivers a maximum frequency of 3 cycles per second, so it is suited for moderate-speed positioning rather than ultra-fast reciprocation.

The 4V330C is a double-solenoid valve with a memory spool—it stays in the last position it was pulsed to. If both solenoids are de-energized, the spring-centered spool returns to the closed mid-position, blocking all ports and holding the cylinder. For suspended loads, always add a pilot-operated check valve or mechanical brake as a safety backup.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V330C-08BIT Solenoid Valve, 5/3-way, closed center, NPT1/4, DC24V, grommet entry (4V330C08BIT)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V330C08BIT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.