
The AirTAC 4V420-15ET Solenoid Valve, 5/2-way, NPT1/2, AC24V, terminal entry (4V42015ET) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/2 ports and an effective area of 48.0 mm² (Cv 2.82). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V420-15ET is a 5/2-way double-solenoid directional control valve built on AirTAC's largest 4V body. It directs compressed air to double-acting cylinders and actuators, and its twin AC24V coils operate on a pulse principle—energise one side to shift the spool, and the valve mechanically holds that last position even if power is removed. This memory behaviour is ideal for circuits where you want the actuator to stay put during an E-stop or power cycle without needing a constant electrical signal.
With an effective area of 48.0 mm² (Cv 2.82) and a maximum cycling rate of 3 cycles per second, this 4V400-series valve suits mid-to-large bore pneumatic cylinders in the Ø80–125 mm range. The AC24V coils each draw 5.0 VA, and the complete valve weighs 720 g. Its aluminium-alloy body, IP65 protection and sub-0.05-second response time make it a robust choice for demanding industrial sequences. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC 4V420-15ET Solenoid Valve, 5/2-way, NPT1/2, AC24V, terminal entry (4V42015ET) |
|---|---|
| Series | 4V400 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/2 |
| Exhaust port | PT1/2 |
| Effective area (Cv) | 48.0 mm² (Cv 2.82) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 720 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 48.0 mm² |
|---|---|
| Flow coefficient | Cv 2.82 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 4 | Body size (4V400) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -15 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V410 (single), 4V420 (double), 4V430C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory spool holds a pneumatic clamp in its last commanded state during a machine cycle stop or power interruption, preventing workpiece shift on large welding or assembly fixtures.
Controls double-acting cylinders on diverter gates and stops for pallet conveyors. The AC24V supply is common in material-handling panels, and the valve's 1/2-inch flow supports rapid gate actuation.
Directs air to large-bore cylinders on forming presses. The double-solenoid memory function keeps the ram in position if the control circuit is de-energised, aiding consistent part forming between cycles.
Choose the 4V420-15ET when your application needs a 5/2 valve that holds its last spool position without continuous power—this saves energy and prevents unexpected cylinder movement during a voltage drop. If you are driving a smaller cylinder (below Ø63 mm), stepping down to a 4V300-series valve (Cv 1.65) often provides a better speed match and a more compact footprint. For flow rates beyond what the 4V400 body can deliver, consider grouping multiple valves on a manifold or moving to a larger valve series.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Getting all five right ensures the new valve drops straight onto your existing sub-base and wiring without adapters.
Quick checklist
With an effective area of 48.0 mm² (Cv 2.82), this 4V400 valve suits double-acting cylinders roughly in the Ø80 to Ø125 mm range for typical industrial cycle rates. The exact speed depends on your operating pressure, tubing diameter and cylinder stroke.
The spool is shifted by a momentary electrical pulse to one coil. Once shifted, it stays in that position through balanced pressure and land friction—there is no spring to return it and no holding current. It is not a magnetic latch; it simply remains where it was last pulsed until the opposite coil is energised.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.