
Genuine AirTAC three-unit frl, order code AC15001 from the AC-BC range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
On PT1/8 ports this AC15001 is the most compact three-unit set in AirTAC's A-line, built from the AF1500C filter, AR1500C regulator and AL1500C lubricator. It is a standard-pressure unit: the regulator covers 0.15-0.9 MPa (20-130 psi) and the fitted GS40 gauge is scaled in MPa.
The 15 cc drain bowl and 25 cc lubricator keep the footprint small, so the set fits tight panels and small machine drops. Drain is differential plus manual, the element filters at 40 um, and maximum pressure is 1.0 MPa (145 psi) with 1.5 MPa (215 psi) proof pressure over -5 to +70 C.
| Order code | AC15001 |
|---|---|
| Product | Three-Unit FRL |
| Model and port | AC1500 · PT1/8 |
| Drain · type | Differential + manual drain · Standard, max 0.9 MPa |
| Gauge · element · thread | Gauge in MPa · 40 µm element · PT thread |
| Models | AC1500, AC2000, BC2000, BC3000, BC4000 |
|---|---|
| Port | AC1500: PT1/8, AC2000: PT1/4, BC2000: PT1/4, BC3000: PT3/8, BC4000: PT1/2 |
| Thread | PT (standard), G, NPT (T) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Drain bowl capacity | A1500/A2000: 15 cc · B2000/B3000: 40 cc · B4000: 60 cc |
| Lubricator capacity | A1500/A2000: 25 cc · B2000/B3000: 60 cc · B4000: 90 cc |
| Components | AF1500C filter + AR1500C regulator + AL1500C lubricator; AF2000C filter + AR2000C regulator + AL2000C lubricator; BF2000C filter + BR2000C regulator + BL2000C lubricator; BF3000C filter + BR3000C regulator + BL3000C lubricator; BF4000C filter + BR4000C regulator + BL4000C lubricator |
| Fluid | Air |
| Regulating range | 0.15 – 0.9 MPa (20 – 130 psi) |
| Low-pressure (L) version | up to 0.4 MPa (58 psi) |
| Maximum pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Recommended oil | ISO VG32 turbine oil |
| Gauge | GS40 on gauge versions |
Source: AirTAC AC/BC series datasheet (p.274, 2025-11 edition, airtac.com), ordering code and specifications.
Choose AC15001 when a PT1/8 circuit needs the full 0.15-0.9 MPa (20-130 psi) range with an MPa gauge. Neighbouring codes: AC15001W is the same set with a 5 um element, AC1500N omits the gauge, and AC1500L limits regulation to 0.4 MPa. If PT1/8 is too small for the flow, step up to the PT1/4 AC20001. The catalog writes the size as 1500C.
AirtacDistr lists every AC-BC order code with its price on one page at https://airtacdistr.com/products/airtac-ac-bc-three-unit-frl
Give workbenches and test jigs one compact PT1/8 block that filters, regulates and oils at once, with the MPa gauge letting you dial the 0.15-0.9 MPa range without a separate regulator.
Feed compact cylinders and mini grippers that run on narrow PT1/8 drops; the 25 cc lubricator meters ISO VG32 oil into low-volume air without needing a full-size unit.
Serve pilot and instrument circuits where the 40 um element and manual-plus-differential drain are enough, and the small 15 cc bowl fits behind a control cabinet wall.
PT1/8 ports; AF1500C filter + AR1500C regulator + AL1500C lubricator; regulating range 0.15-0.9 MPa (20-130 psi); maximum 1.0 MPa (145 psi), proof 1.5 MPa (215 psi); 15 cc drain bowl; 25 cc lubricator; 40 um element; MPa gauge; differential + manual drain; -5 to +70 C.
Drain the 15 cc bowl manually as the differential drain signals condensate, and top the 25 cc lubricator with ISO VG32 turbine oil. The 40 um element is the standard grade; replace it on your maintenance interval rather than on a fixed catalog figure.