
Genuine AirTAC three-unit frl, order code AC20001W from the AC-BC range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
AC20001W is the fine-filtration build of the A-line PT1/4 three-unit set: the AF2000C filter, AR2000C regulator and AL2000C lubricator, with the W option swapping the standard 40 um element for a 5 um element. The digit 1 keeps the MPa gauge, and the pressure side remains the standard 0.15 to 0.9 MPa (20 to 130 psi) regulating range.
Downstream, the tighter 5 um element means the air reaching valves, cylinders and instruments carries far fewer particles, while the differential plus manual drain clears the 15 cc bowl by hand. The lubricator reservoir takes 25 cc of ISO VG32 turbine oil, maximum operating pressure is 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), and the temperature window is -5 to +70 C with no freezing.
| Order code | AC20001W |
|---|---|
| Product | Three-Unit FRL |
| Model and port | AC2000 · PT1/4 |
| Drain · type | Differential + manual drain · Standard, max 0.9 MPa |
| Gauge · element · thread | Gauge in MPa · 5 µm element (W) · PT thread |
| Models | AC1500, AC2000, BC2000, BC3000, BC4000 |
|---|---|
| Port | AC1500: PT1/8, AC2000: PT1/4, BC2000: PT1/4, BC3000: PT3/8, BC4000: PT1/2 |
| Thread | PT (standard), G, NPT (T) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Drain bowl capacity | A1500/A2000: 15 cc · B2000/B3000: 40 cc · B4000: 60 cc |
| Lubricator capacity | A1500/A2000: 25 cc · B2000/B3000: 60 cc · B4000: 90 cc |
| Components | AF1500C filter + AR1500C regulator + AL1500C lubricator; AF2000C filter + AR2000C regulator + AL2000C lubricator; BF2000C filter + BR2000C regulator + BL2000C lubricator; BF3000C filter + BR3000C regulator + BL3000C lubricator; BF4000C filter + BR4000C regulator + BL4000C lubricator |
| Fluid | Air |
| Regulating range | 0.15 – 0.9 MPa (20 – 130 psi) |
| Low-pressure (L) version | up to 0.4 MPa (58 psi) |
| Maximum pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Recommended oil | ISO VG32 turbine oil |
| Gauge | GS40 on gauge versions |
Source: AirTAC AC/BC series datasheet (p.274, 2025-11 edition, airtac.com), ordering code and specifications.
The decision between AC20001W and its sibling AC20001 is purely the element: W costs you nothing on ports or regulation but filters to 5 um instead of 40 um, so take it whenever solenoid valves, air gauging or measurement devices sit downstream. Everything else matches: PT1/4 ports, MPa gauge, differential plus manual drain, 15 cc and 25 cc reservoirs. If flow demand grows, the equivalent B-line BC2000 in W configuration handles more air and, unlike the A-line, accepts the A automatic-drain option; smaller PT1/8 points use AC1500.
AirtacDistr lists every AC-BC order code with its price on one page at https://airtacdistr.com/products/airtac-ac-bc-three-unit-frl
Measurement circuits are intolerant of fine particles, so the 5 um element protects gauging jets and transducers fed through the PT1/4 line.
Dense valve islands with narrow internal passages stay cleaner on the W element, and the MPa gauge lets operators verify set pressure at a glance.
Where small pneumatic components seat tightly, filtered-to-5 um supply plus 25 cc of ISO VG32 lubrication reduces wear on close-fit parts.
Port PT1/4; filter AF2000C with 5 um element (W), regulator AR2000C, lubricator AL2000C; regulation 0.15 to 0.9 MPa (20 to 130 psi); maximum pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi); differential plus manual drain; 15 cc drain bowl and 25 cc lubricator; MPa gauge; temperature -5 to +70 C (no freezing).
W selects the 5 um filter element in place of the standard 40 um element. Keep W for sensitive downstream equipment; for general actuator supply where the coarser element is acceptable and marginally less restrictive, order the plain AC20001. Confirm the exact element change-out details from the datasheet.