
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X50-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X50-30SB is a double acting AirTAC compact cylinder built to ISO 21287, with a 20 mm bore and a 50 mm stroke that an external stop screw trims by up to 30 mm, giving a usable extend range of 20-50 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those figures rise to 219.9 N and 164.9 N, with a theoretical 32 kgf at 1.0 MPa. The male rod thread (B code) suits external tooling, and the fitted -S magnet lets CMSE / DMSE switches report end positions.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight jigs, guarding and gantries where a full-length body will not fit. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, fixed TPU bumpers sit at both ends, and the cylinder runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
With the fitted magnet, CMSE or DMSE switches confirm the rod has reached the trimmed stop before the operator releases the part.
About 94 N of usable force at 0.5 MPa seats small dowels gently, and the male rod thread accepts a custom press tip directly.
The stop screw is a mechanical end stop only: it shortens the extend stroke within the 30 mm window but never holds a load if air is lost. FA flange or LB foot mountings bolt to the ISO 21287 face, and this unit already carries the optional -S magnet, so CMSE / DMSE switches can be fitted without reordering.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N; the theoretical maximum is 32 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 50 mm extend stroke on site, so the working range is 20-50 mm. It shortens the stroke only and acts as an end stop, not a load brake.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits cramped fixtures. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped to the body for end-position signals. FA flange and LB foot mountings plus I and Y rod knuckles bolt straight to the standard face, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.