
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X60-40SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X60-40SB is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 60 mm stroke that an external stop screw trims on site across a 40 mm window, giving a usable extend range of 20-60 mm. The male rod thread (B code) suits inline tooling, and the -S magnet is fitted, so CMSE or DMSE switches can be mounted for end-of-stroke sensing.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight jigs and guarding where a full-length body cannot. The hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers sit at both ends, and speed spans 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-40SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 20-60 mm adjustable extend range lets one cylinder serve several part heights on an electronics assembly fixture, with the fitted magnet confirming ejection via a DMSE switch.
About 94 N of practical working force at 0.5 MPa suits pressing M8 connectors or small bushings into plastic housings, and the male rod thread attaches directly to a press ram.
Used as a pop-up stop for 8 kg or lighter cartons on a sorting lane, the compact body fits under guarding where an ISO 15552 profile cylinder would be too long.
Remember the stop screw only shortens the extend stroke within the 40 mm window and is not a mid-stroke lock - on air loss the piston still drifts, so add a separate valve or lock for load holding. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face; if you need position feedback, this model already carries the optional -S magnet for CMSE / DMSE switches.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
The -40 code is a 40 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 40 mm, so the working range is 20-60 mm. It cannot lengthen the stroke beyond 60 mm, and the stop is not a load-holding brake.
It is an ISO 21287 compact cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. The port is 1/8", the rod end is male thread, and pressure runs 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body slots for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.