verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke60 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$43.20 $49.80Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB

The ACEJ20X60-50SB is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 60 mm stroke that an external stop screw trims on site. The -50 code gives a 50 mm adjustment window, so the extend stroke can be set anywhere from 10 to 60 mm without changing the cylinder.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight pick-and-place heads and fixture plates where a full-length body will not fit. The hard-anodized aluminium barrel carries a hard-chrome plated S45C rod with a male thread (the B code), fixed TPU bumpers at both ends absorb end-of-stroke shock, and because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be mounted directly in the body slots.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke60 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×60Stroke length in mm.
-50Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB Is Used

swap_vert

Small-part lift in assembly cells

With about 9 kg of practical vertical lift at 0.5 MPa, the 20 mm bore raises connectors, covers and sub-assemblies between conveyor and pallet, while the compact body fits shallow gantry frames.

sensors

Position-verified ejector on packaging lines

The fitted -S magnet accepts CMSE / DMSE switches so the PLC confirms each 60 mm extend cycle, and the short body saves roughly half the mounting length of an ISO 15552 profile cylinder in crowded guarding.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB the Right Cylinder?

Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod will still drift if air is lost; use a separate valve or lock for load holding. FA flange or LB foot mounts and I/Y rod knuckles bolt to the standard ISO 21287 face, and the fitted -S magnet lets CMSE / DMSE switches report end positions. Speed range is 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).

AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB FAQ

At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N and pull 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The 20 mm bore uses a 1/8" port and a 10 mm male-thread rod, the extend stroke is adjustable from 10 to 60 mm via the -50 stop screw, speed is 30-500 mm/s, and operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.

It is an ISO 21287 compact cylinder with a hard-anodized aluminium barrel, threaded aluminium covers, a hard-chrome plated S45C rod and fixed TPU bumpers at both ends - about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; FA flange, LB foot and I/Y knuckle hardware bolt to the standard face.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-50SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X60-50SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.