
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X90-40SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Double acting and stroke-trimmable, the ACEJ20X90-40SB is an AirTAC ISO 21287 compact cylinder with a 20 mm bore and 90 mm stroke. An external stop screw shortens the extend stroke by up to 40 mm, giving a usable range of 50-90 mm, and the male-threaded rod (B code) bolts straight into tooling. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; in practice plan for roughly 94 N of real work (about 9 kg of vertical lift with a margin), which suits light clamping and small part transfer.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. A hard-anodized aluminium body carries the S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke impact at both ends, and because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be mounted for end-position sensing.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X90-40SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Trims from 90 mm down to 50 mm to clamp PCB test fixtures or small machined housings, using about 94 N of usable push force at 0.5 MPa.
Ejects connectors, caps or stamped blanks off a conveyor lane; the 50-90 mm adjustable range lets one cylinder serve several lane widths.
With the fitted -S magnet, CMSE or DMSE switches confirm extend and retract on a sorting gate, so a missing part halts the line.
The 90 mm stroke sits inside the 100 mm maximum standard stroke for bore 20, so no made-to-order build is needed. The stop screw trims extension only within the 40 mm window - it is a mechanical end stop, not a mid-stroke lock, so the rod can still drift if air is lost. FA flange or LB foot mountings fit the ISO 21287 face, and the fitted -S magnet enables CMSE / DMSE switch position feedback.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 157.1 N and pull 117.8 N at 0.5 MPa; at 0.7 MPa push rises to 219.9 N and pull to 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke (40 mm window, usable 50-90 mm), runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, port 1/8", rod 10 mm with male thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight jigs and gantries. FA flange or LB foot brackets bolt to the standard face, and fixed TPU bumpers absorb end-of-stroke impact at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.